OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Recovery Points - GU

Hybrid View

  1. #1
    Advanced
    Join Date
    Aug 2017
    Location
    Brisbane
    Posts
    30
    Thanks
    2
    Thanked 9 Times in 6 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Recovery Points - GU

    Hi all,

    Looking to replace the front GU "hook" with recovery points (front). Read a fair bit on here and sent threedogs a PM. Does anyone know if he is still doing these?

    If not, for a 2016 GU Y61, the hook just has 2 bolts, vertical into chassis rail. The recovery points I've seen online (eg: roadsafe RP-PAT04) have 3 holes vertical plus a side horizontal hole which the GU has no-where to bolt that up. Are these just universal and you just bolt up the 2 bolts same as the hook?

    I did notice on the drivers side there is also 3 holes with nuts welded into the chassis above the hook, but the passenger side has the holes with no nuts.

    Any recommendations?

    Cheers,
    Shane
    2016 Y61 Legend Edition

  2. #2
    Legendary GQtdauto's Avatar
    Join Date
    Dec 2016
    Location
    Northeast Victoria
    Posts
    3,012
    Thanks
    5,164
    Thanked 1,911 Times in 1,256 Posts
    Mentioned
    41 Post(s)
    Tagged
    0 Thread(s)
    TD has been dealing with some personal issues so doesn't get to post on the forum much but I'll send him an email for you and ask if he still sells them .

  3. The Following User Says Thank You to GQtdauto For This Useful Post:

    MudRunnerTD (21st March 2018)

  4. #3
    Advanced
    Join Date
    Aug 2017
    Location
    Brisbane
    Posts
    30
    Thanks
    2
    Thanked 9 Times in 6 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Much appreciated, but only if you think he would be ok with it, don't want to be a nuisance.

  5. #4
    Patrol God threedogs's Avatar
    Join Date
    Jun 2012
    Location
    Melb
    Posts
    31,636
    Thanks
    10,350
    Thanked 9,963 Times in 7,394 Posts
    Mentioned
    113 Post(s)
    Tagged
    2 Thread(s)
    Quote Originally Posted by smyz250 View Post
    Much appreciated, but only if you think he would be ok with it, don't want to be a nuisance.
    check and see if my "T" shaped one will fit to the outside of the bull bar.
    dont think my sheetie is open anymore so that puts an end to my folded ones
    04 ST 3lt auto, not enough Mods to keep me happy, but getting there

  6. #5
    Legendary GQtdauto's Avatar
    Join Date
    Dec 2016
    Location
    Northeast Victoria
    Posts
    3,012
    Thanks
    5,164
    Thanked 1,911 Times in 1,256 Posts
    Mentioned
    41 Post(s)
    Tagged
    0 Thread(s)
    Sending you a PM mate

  7. The Following 2 Users Say Thank You to GQtdauto For This Useful Post:

    smyz250 (21st March 2018), threedogs (28th March 2018)

  8. #6
    Adventurist stevemc181's Avatar
    Join Date
    Jan 2017
    Location
    Thornlie,Perth WA
    Posts
    341
    Thanks
    140
    Thanked 516 Times in 188 Posts
    Mentioned
    8 Post(s)
    Tagged
    0 Thread(s)
    I've got three dogs recovery points on my GU 2016 Legend series, they only use the two bolt holes as pictured below.




    2016 GU Legend Edition: 3505Kg GVM Upgrade and Stuff!

  9. The Following 2 Users Say Thank You to stevemc181 For This Useful Post:

    GQtdauto (21st March 2018), smyz250 (21st March 2018)

  10. #7
    Advanced
    Join Date
    Aug 2017
    Location
    Brisbane
    Posts
    30
    Thanks
    2
    Thanked 9 Times in 6 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Thanks for the photos - they look nice and neat / minimal size which is great.

    I have sent an email as per PM.

    Thanks for the help guys - slowly getting the GU ready for the cape

    Cheers,
    Shane

  11. #8
    Legendary GQtdauto's Avatar
    Join Date
    Dec 2016
    Location
    Northeast Victoria
    Posts
    3,012
    Thanks
    5,164
    Thanked 1,911 Times in 1,256 Posts
    Mentioned
    41 Post(s)
    Tagged
    0 Thread(s)
    Might see you up there .

  12. #9
    Travelling Podologist Cuppa's Avatar
    Join Date
    Jan 2011
    Location
    Ballarat, Vic
    Posts
    6,749
    Thanks
    2,135
    Thanked 7,424 Times in 3,003 Posts
    Mentioned
    174 Post(s)
    Tagged
    0 Thread(s)
    I find it almost incomprehensible that any 'serious' 4wd can be sold in standard form without front & rear recovery points suitable for the intended use!

    2006 4.2TDi ex-Telstra Remote area Camper. 425w roof mounted solar, 360Ah Aux batts, BCDC1240, Onboard hot & cold pressurised & filtered water, (25 litre hot water calorifier), ARB fridge, ARB freezer, Built in kitchen, heaps of easy access storage, 240v, 3” Genie exhaust + dynotune, 2” lift, 3900kg GVM upgrade, second glovebox, ROH Blaktrak steel wheels, Bridgestone D697's (now Toyo RT's), Redarc gauges/pillarpod, Hema HX-1, Icom 450 CB, dual rear view cameras, Onboard 30amp Victron mains charger, second glovebox, dual seat conversion, TPMS, Boss PX7 onboard air with 9 litre tank, 350w inverter, Steel bullbar, Harrop Eaton diff lock (front), Warn winch, Snorkel, Dual spares , 160 litre water tank, 180 litre fuel in two tanks (approx 1200km range) 2010 Tvan Tanami. (incl another 70 litre water tank) with matching wheels/tyres (& 3rd spare)
    A Nomadic Life (Blog)

  13. The Following User Says Thank You to Cuppa For This Useful Post:

    GQtdauto (22nd March 2018)

  14. #10
    Advanced
    Join Date
    Aug 2017
    Location
    Brisbane
    Posts
    30
    Thanks
    2
    Thanked 9 Times in 6 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Yeah or even worse - have something there that 'almost' does the job! That's even worse... like the hook front and loop rear.

    As for the cape - keep an eye out, we'll be pretty easy to recognise. Us in the Legend Edition (not many of those around) and my father-in-law with his 60 series bright red landcruiser sahara. Say hi if you spot us Oh yeah - around june 25 - july 20
    Last edited by smyz250; 22nd March 2018 at 09:12 PM.

  15. The Following User Says Thank You to smyz250 For This Useful Post:

    MB (22nd March 2018)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •