Replacing radiator hoses at the moment and after taking off the lower hose I see the water pump inlet looks like this.
IMG_20180213_192454.jpg
After cleaning it up a bit it looks like this.
Is this gone too far or could I use it again?
Replacing radiator hoses at the moment and after taking off the lower hose I see the water pump inlet looks like this.
IMG_20180213_192454.jpg
After cleaning it up a bit it looks like this.
Is this gone too far or could I use it again?
Last edited by Chubba; 13th February 2018 at 10:03 PM.
98' Ti, 4.5L, 2" lift, factory rear diff lock with front E-locker, 63% reduction gears
"GO YOU CROWS"
Posting Permissions
Reply With Quote