-
5th February 2018, 02:04 PM
#1
Scanguage 11
Have any forumites installed a Scanguage 11 in their Y62? I removed one from my LC200 before I sold it and am hoping to install it in my Y62 Series 4.
As in the LC, I'd like to be able to monitor real-time transmission fluid temp, coolant temp, fuel consumption, and correct speed calibrated via a hand-held GPS.
If anybody has one installed and knows the installation codes for the 4 functions I've mentioned, please advise.
Thanks.
-
-
5th February 2018 02:04 PM
# ADS
Circuit advertisement
-
5th February 2018, 06:32 PM
#2
-
-
6th February 2018, 09:35 AM
#3
Thanks, I'm investigating various info sources.
-
-
6th February 2018, 05:34 PM
#4
SPAMINATOR
Originally Posted by
maxalby
Thanks, I'm investigating various info sources.
Been looking for my users manual but so far no good. I'll keep lookin
IF YA DONT GET STUCK YA AINT TRYIN HARD ENOUGH........OR YA TOOK THE CHICKEN TRACK
WARNING: TOWBALLS USED WITH SNATCHSTRAPS DO KILL!!
-
-
1st May 2018, 07:40 PM
#5
The measurement/monitoring of ATFT has been the subject of much discussion on various forums and FB pages. It seems apparent that all of the current OBDII gauges whether wired direct to the port or via WiFi do not have that ability.
The Nissan diagnostic tool which is extremely expensive (or so I've been told) can do so.
Despite that, the Y62 auto is one of the most robust units around.....in the UAE where these vehicles are hammered, I have not yet seen any major issues from that part of the world. And yes, I understand that small/no load "fanging" is different to our towing of ridiculously heavy caravans over all kinds of terrain at relatively high speeds.
-
-
16th June 2023, 07:43 PM
#6
Any recommendations as to best OBD2 scanner for Y62 Patrol ie is ScanGuage 2 good
-