-
27th January 2018, 03:59 PM
#1
2004 gu 4.2
hi everyone I have a 2004 gu with the 4.2 motor an a 5 speed gearbox now between motor an the gearbox there is this black rubber thing on the underside dose it need to be there and how would you get it out its full of oil from rear filter when being changed thank for any help.
-
-
27th January 2018 03:59 PM
# ADS
Circuit advertisement
-
27th January 2018, 04:34 PM
#2
Patrol God
Are you talking about the little plastic in the middle? Almost looks like a drain plug?
-
-
28th January 2018, 11:39 AM
#3
no under the motor an between the gear box and back of motor black rubber thing
-
-
28th January 2018, 07:17 PM
#4
Moderator
Originally Posted by
moonie
no under the motor an between the gear box and back of motor black rubber thing
can you post a pic of it please.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
-
28th January 2018, 11:21 PM
#5
Patrol God
There is foam between the sump and gear box. It is held in place by the support brackets that bolt to the engine block and bell housing. If you remove the support brackets this foam/rubber can removed easily.
-
-
29th January 2018, 07:36 AM
#6
Patrol God
Yes. Nissannewby is right again.
I just had another quick look and remembered a while ago it was a bit soaked with oil, courtesy of oil filter change . And I assumed it was my rear main seal. Bit it was just the spongy material which absorbed a bit of that oil.
Sent from Note 5 using TapaPro
-
Posting Permissions
Reply With Quote