OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 10 of 13

Thread: Replacement AM/FM radio antenna for 1997 GQ

Threaded View

  1. #11
    Legendary
    PeeBee's Avatar
    Join Date
    Sep 2016
    Location
    Melbourne South east
    Posts
    4,761
    Thanks
    4,632
    Thanked 4,743 Times in 2,688 Posts
    Mentioned
    194 Post(s)
    Tagged
    0 Thread(s)
    Way back in the day, the first CB antennas were constructed like this and they typically failed from constant knocking thru bush, the plastic shrink tubes got brittle from UV degradation and hardened, making it easy for the protective wrapping to crack. Water gets down into the base of the antenna itself and starts to corrode the wire connection. In time the wires that are corroded break or work loose from the contact with branches. If the vehicle doesn't get used in that sort of environment, I guess the antenna style is fine - I mean before ZCG came along and changed the construction to a total copper sheath without the individual wire 'ribs', this was the only option and more or less accepted. I don't doubt the performance of these antennas, just that ZCG have good runs on the board for me.
    Last edited by PeeBee; 28th January 2018 at 11:08 AM.

  2. The Following User Says Thank You to PeeBee For This Useful Post:

    jay see (28th January 2018)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •