-
2nd December 2017, 10:28 AM
#1
Dump Pipe Size?
Hi all,
I am fitting a Redarc EGT gauge to the truck. It is a GUIV with ZD30. Not wanting to replace the exhaust in the near future, I was wondering if anyone knew the diameter of the standard dump pipe. Redarc provide a clamp that secures the sensor into the pipe.
I appreciate any help.
Thankyou
Cruiseboxer
-
-
2nd December 2017 10:28 AM
# ADS
Circuit advertisement
-
2nd December 2017, 11:27 AM
#2
Moderator
any exhaust place will weld on the bung for you for $50 or less i reckon.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
-
2nd December 2017, 11:30 AM
#3
Dump Pipe Size?
I had a bung welded onto mine before changing to a 3”. See pics below
Cheers
Edit: cost around 120 for the bug to be welded in (and I’d already trimmed up the heat sheild).
Last edited by trev zd30; 2nd December 2017 at 11:41 AM.
-
-
9th December 2017, 07:39 PM
#4
-
-
9th December 2017, 07:40 PM
#5
-