-
15th November 2017, 09:34 PM
#1
Legendary
-
-
15th November 2017 09:34 PM
# ADS
Circuit advertisement
-
15th November 2017, 09:43 PM
#2
Legendary
Similar to my TJM bar that's about the same vintage , I will check mine tomorrow as I have a broken lens and it needs to come out , what are those worth mate .
-
-
15th November 2017, 09:46 PM
#3
Legendary
Ah cheers mate legend. They were 70 bucks plus postage, look pretty snazzy I reckon. .
Sent from my GT-I9506 using Tapatalk
-
-
15th November 2017, 10:28 PM
#4
Legendary
Well they're not broken that's a start , I think I tried unscrewing it once before but mine are rusted badly from memory , either way I'll get the measurement of the distance of the screw holes and size of lens .
-
The Following User Says Thank You to GQtdauto For This Useful Post:
Rossco (15th November 2017)
-
15th November 2017, 10:39 PM
#5
Rossco I had my arm twisted by the nightmare vass engineer in Bayswater and ended up finding a pair of indicators to suit the arb deluxe bar, might even be led, but have not fitted them as yet, however they
We're identical to the original arb lights. Only difference was the old lights were just indicators where the updated ones are like yours with the Parkersburg as well. Probably does not help you but I could try and find them and get you a part number if you are interested?
-
-
15th November 2017, 10:41 PM
#6
Legendary
Yeah awesome if you can get a picture of the back of it that would be sweet as.
Sent from my GT-I9506 using Tapatalk
-
-
15th November 2017, 10:46 PM
#7
Legendary
Originally Posted by
PeeBee
Rossco I had my arm twisted by the nightmare vass engineer in Bayswater and ended up finding a pair of indicators to suit the arb deluxe bar, might even be led, but have not fitted them as yet, however they
We're identical to the original arb lights. Only difference was the old lights were just indicators where the updated ones are like yours with the Parkersburg as well. Probably does not help you but I could try and find them and get you a part number if you are interested?
I think i had a sneaky look @ your bar and it is definitely an ARB. They are slightly smaller and are recessed in a bit. I originally got these ones then tried them & were too small. Cheers heaps but all good. . .
Sent from my GT-I9506 using Tapatalk
-
-
15th November 2017, 11:18 PM
#8
I rang arb initially and they only listed the indicator alone. The Bayswater guy told me the car Ess unroadworthy if he was to do the engineering on it because the front Parkersburg were obscured by the arb bar side upright. I challenged him as to how this could even be on the road in the first place, but he simply said it did not meet today,s regs and would not be passed so I found the other lights but just have not got round to fitting them as yet. Sure they are a direct change over
-
-
16th November 2017, 09:07 AM
#9
Travelling Podologist
The holes in my bar have no tabs at the back. Instead the light itself has an additional black plastic surround which recesses the light into the bar at an angle. The Surround attaches to the bar with two screws & the light attaches to the surround with two screws
DSC00158.jpgDSC00157.jpg
2006 4.2TDi ex-Telstra Remote area Camper. 425w roof mounted solar, 360Ah Aux batts, BCDC1240, Onboard hot & cold pressurised & filtered water, (25 litre hot water calorifier), ARB fridge, ARB freezer, Built in kitchen, heaps of easy access storage, 240v, 3” Genie exhaust + dynotune, 2” lift, 3900kg GVM upgrade, second glovebox, ROH Blaktrak steel wheels, Bridgestone D697's (now Toyo RT's), Redarc gauges/pillarpod, Hema HX-1, Icom 450 CB, dual rear view cameras, Onboard 30amp Victron mains charger, second glovebox, dual seat conversion, TPMS, Boss PX7 onboard air with 9 litre tank, 350w inverter, Steel bullbar, Harrop Eaton diff lock (front), Warn winch, Snorkel, Dual spares , 160 litre water tank, 180 litre fuel in two tanks (approx 1200km range) 2010 Tvan Tanami. (incl another 70 litre water tank) with matching wheels/tyres (& 3rd spare)
A Nomadic Life (Blog)
-
The Following User Says Thank You to Cuppa For This Useful Post:
Rossco (16th November 2017)
-
16th November 2017, 10:35 AM
#10
Legendary
My bar which is TJM is different to yours mate but here's the stats of the blinker lens .
Screw hole centres are 208mm , width of hole in bulbar is 190mm X 58mm.
Whole assembly has to be fitted from the back as it's bigger than the hole in the bar .
IMG_8228.JPG
-
The Following 2 Users Say Thank You to GQtdauto For This Useful Post:
Pete49 (3rd April 2020), Rossco (16th November 2017)