-
9th September 2017, 06:53 PM
#1
Patrol Freak
SCA winch switch wiring
I am wiring in my in cab winch switch.
It is a 6 pin SCA momentary switch.
Does anyone have a wiring diagram they can share?
I have 4 wires and was wondering what pins I should be using.
-
-
9th September 2017 06:53 PM
# ADS
Circuit advertisement
-
9th September 2017, 07:49 PM
#2
Legendary
Hey mate, if it's a Carling type, this might help hopefully. . . Need to re wire my one too, isn't working atm. . .
Sent from my GT-I9506 using Tapatalk
-
-
9th September 2017, 09:35 PM
#3
Patrol Freak
Thanks for that but I have a 6 pin switch.
-
-
10th September 2017, 08:06 PM
#4
Patrol Freak
Turned out to be pretty simple.
3 wires only as the unit is grounded at the control box on the winch.
3 pins on the left TOP - IN, MIDDLE - POWER, BOTTOM - OUT
The pins on the other side weren't used.
-
-
12th September 2017, 09:41 AM
#5
Expert
Make sure you have a master switch inside as well. Don't want to accidentally wind the winch in while your driving.
Could ruin your day lol
Sent from my iPhone using Tapatalk Pro
-
-
12th September 2017, 01:59 PM
#6
Patrol Freak
Yeti I have installed an isolator switch as well
. I had heard that before and made sure it was part of the set up.
I have posted a pic of the install in another thread.
-