Anyone recommend a good egt gauge

[Richard91]

Any one recommend a good egt gauge as im getting a new exhaust system next week, already have a saas boost gauge and just wanna hear a few suggestions thanks

[MudRunnerTD]

Not SAAS. ... i have a VDO in my GQ and an Autometer in my GUIV and I reckon the VDO is a better unit.

[nissannewby]

VDO, auberins, autometer, glo-shift, Mcnally all do nice items.

[MB]

Pretty sure Mrs MB's 4.2TD 'Redarc' EGT guage is broken. Keeps beeping and flashing above 550 Degrees when flogging it without an IC :-)
Are Redarc's even slightly worthy or have we been dudded :-( ?

[Bidja]

Prefer and currently fitting VDO. Pyro probe and fittings are of good build quality and gauge has a clear plain face. Check the port thread in dump pipe, if one exists as supplied, to be compatible with thread fitting on EGT. VDO has 1/4"NPT(m) fitting but my exhaust dump had two ports (EGT "1/8"BSP & Oxy "18mm x 1.5mm). I decided to use large port and found a reducing bush adaptor SS 18x1.5mm to 1/4" NPT. Secure Fit.

[Hodge]

I have had autron / redarc on both patrols good bit of kit.

Sent from my SM-G920I using Tapatalk

[mudski]

Running the McNally jobbie in mine. Boost is easy to read on the fly and so is the EGT read out.
1413089121924.jpg

[the evil twin]

V d o .

[mudski]

Pretty sure Mrs MB's 4.2TD 'Redarc' EGT guage is broken. Keeps beeping and flashing above 550 Degrees when flogging it without an IC :-)
Are Redarc's even slightly worthy or have we been dudded :-( ?

Dont flog it Mr MB. Problemo solved.

[Rossco]

Another one for vdo nice and simple and easy to read. Redarc usually make nice stuff so assume they're good

Sent from my GT-I9506 using Tapatalk