-
28th July 2017, 07:31 PM
#1
Brake controllerbrake wire problem
Hey guys installed a redarc tow pro. Having a problem hooking up the brake wire. I planned to go off the pedal but the plug comes off and wiring disappears up into the dash with no excess to pull down on. I have already ran the blue trailer wire to the plug at the rear and don't really want to trap brakes from the rear. Is there somewhere else towards the front that I can grab it from.
It's a 96 gq td42
Cheers
Alex
-
The Following User Says Thank You to Alex93 For This Useful Post:
Yeti's Beast (28th July 2017)
-
28th July 2017 07:31 PM
# ADS
Circuit advertisement
-
28th July 2017, 07:51 PM
#2
Expert
I just installed one to my car last weekend and I joined it into the wire coming off the pedal switch. During the week I was at a caravan repair centre and during our chat I mentioned how I just installed the Tow pro and he said I hope you ran a wire from your trailer plug back to the controller and not off the brake switch? I'm like um no, but will look into it. Lol
Sent from my iPhone using Tapatalk Pro
-
The Following User Says Thank You to Yeti's Beast For This Useful Post:
-
28th July 2017, 07:56 PM
#3
Legendary
Hey mate, ran mine off the brake light switch too, just spliced it near the pedal. Must have had electric brakes at a previous time as just had spade terminals instead of the proper plug. Guess that's an option too. Mines GQ also BTW. . .
Sent from my GT-I9506 using Tapatalk
-
The Following User Says Thank You to Rossco For This Useful Post:
-
28th July 2017, 08:03 PM
#4
Yeah the blue wire runs down into the trailer plug. There is just no slack on my brake pedal switch even unplugging it. It just runs straight up towards the top f the dash. How did you join your wire because I may be able to use some spade terminals but was preferring to solder it
Alex
-
-
28th July 2017, 08:04 PM
#5
Yeah ok that sounds the go mate
-
-
28th July 2017, 08:26 PM
#6
Legendary
Can you just strip the insulation then solder too it ? . .
Man i love doing under dashboard jobs, need to turn into a contortionist
Sent from my GT-I9506 using Tapatalk
-