Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Hi all gearbox back in new clutch A big YAY !!! . But . .... It went in easy with a trans Jack I was a god send . the hard bit was turning the gearbox. but all done now .I have a couple of problems .
I the routing of the transmission wiring loom around the starter motor . Has anyoue got a picture ?
2 the greasing of the uni joints Is there a special grease nipple adapter to get onto the front uni joint . I cannot get it to seal so as to get the grease in . !
3 I fitted a new startor motor A non genuine one .and the solenoid has a different connection its a spade type so made a adapter cable . So I can re fit the original at some later date (original full of oil)
all in all its a bugger of a job . will take a few days to recover . I am looking at an alternative way to down load the manual as its way to big for my wireless connection like 3 hours !!! any ideas whould be good . thanks to all Tip