Hi guys,

So I have recently done an engine swap with my tb42efi, I have just swapped it with another tb42. after months of trying different things I am still stuck with a car that won't start. The engine I had in previously did start, I have only swapped the long motor and kept all the original efi gear.

Things I have replaced:
Coil
Coil lead
Crank angle sensor
Dizzy cap
Dizzy
Spark plugs
Leads
Ignition module

Things I have checked:
All relays and fuses
Power is at all all components, including dizzy and coil

The car cranks over perfectly, and fuel is getting to the injectors, and I have injector pulse, I literally cannot get spark from the coil.

I had an auto sparky come out, but he was unable to find the problem either.

Any ideas from you guys would be appreciated.

Cheers.