-
9th June 2017, 06:31 PM
#1
Mudski's five minute rear draw table.
Now I have somewhere to put my drink! Yay!
Not overly impressed with the current rear door tables, while they are good it just didn't click. So we are going away this weekend and I didn't want to take my small fold out table and remembered what old mate Kallen said to me many moons ago about making a table to fit on top of the drawers. Thinking to much into it I thought it was all too hard and left it. Until now.
While munching on some Biltong and sipping a Jack and coke I thought to pull out the Jigsaw and give it a whirl. Well It took maybe a whole five minutes from start to finish to make. And I must say its a bloody good table. Haha!
Tools used is a Jigsaw, a pencil, a measuring implement, a straight edge, a whole saw, cordless drill, impact driver and some sand paper.
Materials used. A piece of 12mm thick plywood, cut so the grain of the wood runs left to right for added strength and less flexing, and four timber screws.
Last pic is kinda hard to see. It was getting dark outside. I'll get a better pic with better light....
20170609_171236 (Medium).jpg20170609_171244 (Medium).jpg20170609_171816 (Medium).jpg
-
The Following 11 Users Say Thank You to mudski For This Useful Post:
AB (9th June 2017), Bacho86 (10th June 2017), gubigfish (9th June 2017), jay see (10th June 2017), MB (9th June 2017), MudRunnerTD (9th June 2017), my third 256 (10th June 2017), NissanGQ4.2 (9th June 2017), Softy (10th June 2017), the evil twin (10th June 2017), TPC (10th June 2017)
-
9th June 2017 06:31 PM
# ADS
Circuit advertisement
-
9th June 2017, 06:37 PM
#2
.........
Love it Mr Mark, good old 'Kiss' theory strikes again mate!
That is one perfect 'Thunder Box' lid mate, high tensile fence wire for the dunny roll on the inner barn door needed now bro :-)
-
The Following User Says Thank You to MB For This Useful Post:
-
9th June 2017, 06:44 PM
#3
Patrol Freak
I like that and I have all the required bits.
Guess what I am doing tomorrow.
-
The Following User Says Thank You to Mc4by For This Useful Post:
-
9th June 2017, 06:56 PM
#4
![Quote](images/misc/quote_icon.png)
Originally Posted by
MB
Love it Mr Mark, good old 'Kiss' theory strikes again mate!
That is one perfect 'Thunder Box' lid mate, high tensile fence wire for the dunny roll on the inner barn door needed now bro :-)
Haha! I aint gonna use my rear drawer as a dunny.
-
The Following User Says Thank You to mudski For This Useful Post:
-
10th June 2017, 12:12 AM
#5
Legendary
Nice work mate.
5 minutes yeah...
Can tell you, barely drank anything from your glass.
Where you ended up going.
Sent from my A1601 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
-
10th June 2017, 12:43 AM
#6
..........
Good idea, I have a bench top on my right drawer but payed for it when I bought the drawer, should have made it like you did as it would have cost less and looks better.
-
-
10th June 2017, 12:36 PM
#7
I am he, fear me
![Quote](images/misc/quote_icon.png)
Originally Posted by
MB
Love it Mr Mark, good old 'Kiss' theory strikes again mate!
That is one perfect 'Thunder Box' lid mate, high tensile fence wire for the dunny roll on the inner barn door needed now bro :-)
You must be a better shot than me if you can punch a steamer thru a hole that small... def would not want to attempt that the morning after "Camp Curry Night"
Great result Mudski...
Sadly my carpentry skills are very lacking in some part of the process.
"Measure once, have a beer, measure twice, have another beer, measure a third time and average the three different measurements during a beer break.
Commence first cut and another beer, mark where it doesn't fit, have a beer and cut again.
Have a beer while wondering why it still won't fit, finish another Beer and try another cut then throw the resulting abortion on the wood pile and sulk while finishing the Carton."
If I ever figure out where I am going wrong I'll definitely give that drawer table idea a crack
Dolphins are so smart that within a few weeks of captivity, they can train people to stand on the very edge of the pool and throw them fish.
-
The Following 5 Users Say Thank You to the evil twin For This Useful Post:
gubigfish (10th June 2017), MB (10th June 2017), mudski (10th June 2017), Plasnart (10th June 2017), Touses (11th June 2017)
-
10th June 2017, 01:00 PM
#8
Patrol Freak
Nice work mate, good little addition to the draws!
Enjoy the long weekend away!
Sent from my iPhone using Tapatalk
2008 GU6 3.0 CRD AUTO | Safari Snorkel | 2" Ironman lift kit | Runva 11XP Winch | 33" MTZ's | Full Length Roof Rack | GME TX3200 | 30" LED Light Bar |
-
The Following User Says Thank You to Bacho86 For This Useful Post:
-
10th June 2017, 09:19 PM
#9
![Quote](images/misc/quote_icon.png)
Originally Posted by
jay see
Nice work mate.
5 minutes yeah...
Can tell you, barely drank anything from your glass.
Where you ended up going.
Sent from my A1601 using Tapatalk
Yer that was my third one. lol We haven't gone anywhere yet. I had to work today. Going in the morning. We are going towards Sheepyards but going much further in and camping at Pikes Flat which is way upstream. Should be quiet up there.
-
The Following User Says Thank You to mudski For This Useful Post:
-
11th June 2017, 12:26 PM
#10
Patrol Freak
![Quote](images/misc/quote_icon.png)
Originally Posted by
mudski
Yer that was my third one. lol We haven't gone anywhere yet. I had to work today. Going in the morning. We are going towards Sheepyards but going much further in and camping at Pikes Flat which is way upstream. Should be quiet up there.
Have you stayed at pikes flat before? If it's the place I'm thinking of that we passed through, I thought it was a pretty average spot?
We stayed at 7 mile flat last long weekend based of your feedback and that was pretty nice!
Sent from my iPhone using Tapatalk
2008 GU6 3.0 CRD AUTO | Safari Snorkel | 2" Ironman lift kit | Runva 11XP Winch | 33" MTZ's | Full Length Roof Rack | GME TX3200 | 30" LED Light Bar |
-