Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
After looking all over for a monitor that was good priced and done what i needed i found this! Dual Batt, Monitor from Sidewinder, Derek from Sidewinder modded it for me to use the Link switch with my Redark isolator.Second pic is engine running! and the LED stays on when Batt's are linked. Very Happy!!!!
Hey mate - looks good, as said, what price? I've dealt with Derek also and would be good to get this setup when I pick up the camper with the deep cycle in it.
$86 delivered to Adelaide and $10 to do the mod for Redarc if needed , Bloody good value i rekon, Also forgot to mension the Batt, 1 - 2 switch has off in the middle position. And id'e only use the Link if my start batt. died.
$86 delivered to Adelaide and $10 to do the mod for Redarc if needed , Bloody good value i rekon, Also forgot to mension the Batt, 1 - 2 switch has off in the middle position. And id'e only use the Link if my start batt. died.
What happens in "Off"... is that just for the display?
...and yeah, Sidewinder are brilliant to deal with. I get a fair bit of stuff from him for work and play
On the link switch that stays off unless you have a flat start batt. then turn it too on to link aux. for starting! So will stay in the off position unless flat stert batt. The batt. 1 and 2 switch shows start as no.1 and aux. at no. 2 Its a three position switch so in the middle nothing shows , its off. The LED light stays on showing batteries are both joined to receive charge! Mine stayed on all night cause the start didn't drop to 12.7V where the redark isolates the batts.
HELL NO !!!!!!
Originally Posted by 89GQ
Posting Permissions
Reply With Quote