-
6th March 2017, 11:24 AM
#481
....oh and no other engine mods....yet.
-
-
6th March 2017 11:24 AM
# ADS
Circuit advertisement
-
6th March 2017, 11:41 AM
#482
Well I did go with a 3" zorst and after almost 2 weeks of driving, I've had no over boost or dangersous EGT levels or anything. The 3" mod is definitely worth doing, I can here the Trol thanking me every time I drive it.
-
-
6th March 2017, 01:58 PM
#483
Just as an aside to the EGR blocking debate, I read somewhere sorry can't remember, that the soot and other crap reinserted into combustion chamber finds its way into engine oil. Right numerous posters here acknowledge oil is cleaner after blocking, however what I read was that modern engine oils bond with the soot etc and effectively scour the engine parts it comes in contact with supposedly keeping engine parts cleaner...may or may not be BS... and certainly I'd prefer to have the cleaner inlet tract blocking the EGR brings to the table...so horses for course I guess.
2011 ex CSIRO 3.0Lt CRD. ARB bar, WARN winch, Uniden CB, Redarc Dual battery set up, 3/4 length roof basket, 3" RedBack exhaust, Cooper ATs. UltraGuage (when it arrives)
Truthfully, and I know this is sacrilege, but I'd rather be off road on my Husky...(bike not dog)
-
-
4th November 2017, 09:56 PM
#484
Cool thread easy to understand
-
-
13th May 2018, 08:43 PM
#485
Hi guys im new to patrols bought mine a week ago now 2003 patrol 3.0 diesel with catch can all guages fitted. Thermo fans all the stuff i have read and has a 3 inch exhaust. But no egr block should i do this. I know nothing about these vehicles but what i have read. And want to keep her going. Just a bit worried about limp mode as mentioned. Will i get this and no idea about playing with turbo boost. Love this site its helping me to learn.
-
-
15th May 2018, 03:32 AM
#486
SPAMINATOR
Originally Posted by
2003new2patrols
Hi guys im new to patrols bought mine a week ago now 2003 patrol 3.0 diesel with catch can all guages fitted. Thermo fans all the stuff i have read and has a 3 inch exhaust. But no egr block should i do this. I know nothing about these vehicles but what i have read. And want to keep her going. Just a bit worried about limp mode as mentioned. Will i get this and no idea about playing with turbo boost. Love this site its helping me to learn.
Yep I'd me ensuring all the NADS mods are carried out mate
IF YA DONT GET STUCK YA AINT TRYIN HARD ENOUGH........OR YA TOOK THE CHICKEN TRACK
WARNING: TOWBALLS USED WITH SNATCHSTRAPS DO KILL!!
-
-
18th July 2018, 07:40 AM
#487
Hello,
Just wondering if blanking could be substituted by inserting a one-way valve in the pipe leading to the EGR actuator? Has anyone taken the actuator apart - is the diaphragm strong enough? I would be curious if the actuator fully closes the recycling port when under full boost and keep it that way.
Cheers,
Tamas
-
-
18th July 2018, 08:15 AM
#488
The master farter
Originally Posted by
Tamas
Hello,
Just wondering if blanking could be substituted by inserting a one-way valve in the pipe leading to the EGR actuator? Has anyone taken the actuator apart - is the diaphragm strong enough? I would be curious if the actuator fully closes the recycling port when under full boost and keep it that way.
Cheers,
Tamas
Putting a blanking plate is a 10 minute job. Id say retro fitting a one way valve might take a while longer. Just to achieve the same outcome.
-
-
16th November 2018, 11:35 AM
#489
Advanced
Is the EGR in the same place in the CRD (2008 DX)?
-
-
2nd January 2019, 01:26 PM
#490
Why do we need to fit EGR blanking plates on the ZD30DDTI when the recirc system has a butterfly to begin with? Cant we just remove the vacuum from the solenoid to that?
-