-
22nd May 2017, 04:58 PM
#1
Wiring loom for GQ 4.2efi
Hi all,
Been trying to find a wiring loom for my GQ . Seems hard to find. Mine has had a meltdown some time ago. It was caused by the LPG installation, over the years it wore though causing a problem. To repair I need to remove the dash. It be easier to replace the lot.
Model is 4.2efi automatic, manual window winders.
I have tried lots of wreckers. But get a no cannot do.
-
-
22nd May 2017 04:58 PM
# ADS
Circuit advertisement
-
22nd May 2017, 06:08 PM
#2
Rotaredom
Moved thread into the wanted section of the forum.
Cheers,
Toddie
Time is never wasted when your wasted all the time
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
-
22nd May 2017, 06:55 PM
#3
Legendary
Spewn mate just pulled one out of a cab I'm using to fix my GQ, but seriously hacked it to pieces and is in the bin now. Couple of weeks earlier would have been all in one piece. Was a ti one tho but would probably still work ? . .
Sent from my GT-I9506 using Tapatalk
-
-
22nd May 2017, 07:50 PM
#4
Ahhhhh. I been told my message is to short. Now it can be posted..
-
-
22nd May 2017, 08:02 PM
#5
Rotaredom
Originally Posted by
Rossco
Spewn mate just pulled one out of a cab I'm using to fix my GQ, but seriously hacked it to pieces and is in the bin now. Couple of weeks earlier would have been all in one piece. Was a ti one tho but would probably still work ? . .
Sent from my GT-I9506 using Tapatalk
Onya Rossco....
Would think a TI would still be the same harness but who knows
Time is never wasted when your wasted all the time
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
-
22nd May 2017, 08:22 PM
#6
SkippyGU
I might be able to chase one down for you
It's coming off a gq 4.2 auto with lpg and manual windows and stuff
Do ya still need it
Currently own a ZD30 2000 GU patrol with a dead injector pump
about to start a build on a TD42 motor to go in the car and basically rebuild the whole car into a machine of a rig
-
The Following 3 Users Say Thank You to JackCollo For This Useful Post:
AB (22nd May 2017), NissanGQ4.2 (22nd May 2017), Rossco (22nd May 2017)
-
23rd May 2017, 11:05 AM
#7
SkippyGU
What part of the wiring loom do you need
Currently own a ZD30 2000 GU patrol with a dead injector pump
about to start a build on a TD42 motor to go in the car and basically rebuild the whole car into a machine of a rig
-
-
23rd May 2017, 06:27 PM
#8
Yes please. Sounds like mine. I also had LPG.
-
-
23rd May 2017, 06:31 PM
#9
Basically the whole loom, it's all one except for the engine harness.
-
-
25th May 2017, 12:03 AM
#10
What is difference between the TI and the RX in the electrical part
-