Wheels not running straight

[Addy]

No its a Camber adjustment done on the King Pin bearing rather than a Caster adjustment done on the radius arm bushes. Camber puts a slight lean on the left side wheel to counter the effect of the camber on Australian roads. I think i added a 1 degree adjustment (Not much but changed the World)

Read this fitting instruction as it explains a fair bit

http://safetsteer.com.au/portal/port...t/view/89/141/

and here is the kit i fired to the left side King pin

http://safetsteer.com.au/portal/content/view/192/338/

Thanks again for the info, gave it a quick read but not sure if it was in english, made no sense to a novice like myself.

Which professional trade/shop would be best to fix this for me if i wanted it done?


Sent from my iPhone using Tapatalk