Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Mine came from http://www.ebay.com/usr/carpartsinno...p2047675.l2559
$99 us plus $23 us delivery about $160 odd our money.
Photos of what I did drivers side in working out the tang spacing , this did not work for left side I had to redrill the pivot hole 5mm further back .
At some stage you will need to remove door skin because there is a lot of checking involved , angle down you need on 100x50 you need to check it's not much on mine , I should have done the wiring and connected it up when I was testing for fit because although it all seemed ok when it was all welded up and painted I couldn't adjust the left mirror enough to see close to the car . IMG_7442.JPGIMG_7443.JPGIMG_7444.JPG
Sorry for all the photos just trying to give you as much info as I can to make it easier to work out .
.gif "GQtdauto's Avatar")
Reply With Quote