Winch switching help needed

[Fīfţý]

Hi I recently purchased a 2013 GU wagon. It has most mods done already however looks like most were DIY and not done to a decent standard. The problem i gave at the moment is the ironman winch that is fitted didn't have a controller come with the vehicle when I bought it. I have since bought new wireless controllers and sender that was a simple like for like change out. However the winch still doesn't work. I have now learnt that they use a wireless activator plug where the cable connects but I don't have that either. So I figure this activator simply bridges out terminals to power the sender does anyone know if I'm right and if so what terminals. If I can do this I will blank the socket for the plug all together and run the bridge wires through a switch out of tampering reach

[PeeBee]

Have you tried contacting an ironman distributor? They should have the parts to bring it back to original format so you don't end up with more 'Gerry built' stuff. Just a thought

[threedogs]

X 2 with above give Ironman a buzz Im sure they
would be only to happy to help you out and a Vendor here as well
win win IMO