12,000 pound winch compatibility

[JackCollo]

Hey guys a few months ago I bought myself a 2000 GU II ZD30 patrol built September 2000 and I was just wondering if I can fit a 12,000lb winch to the genuine Nissan bar. It's a steel bar part no. F2210-VB200A

Any help would be greatly appreciated

[Mc4by]

I have been thinking the same thing and found this website.

http://www.nissangupatrol.com/produc...alloy-bullbar/

[JackCollo]

Not sure if this will fit the stock steel bullbar
The previous owner had a winch but I'm not really sure if everything is there for mounting a 12,000lb winch

[Mc4by]

In my rush to send the link to the cradle I missed that you said steel, I have the allow and it works for that one.

[Coger]

Am looking at fitting a winch to my steel factory bar. Should be able to fit, the bottom mount bolts are low, behind some bar work, so the winch rope will have to feed over the top of the winch, I have seen somewhere on the forum how to mount winch, start with the post runva 11 xp install.