OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: tb42e idle rough as guts

  1. #1
    Beginner
    Join Date
    Jan 2017
    Location
    melbourne
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    tb42e idle rough as guts

    hey guys new member 1st post
    I drive a tb42e 1993 and it runs rough as guts hot or cold the idle will be like its got a very large cam in it but it does not
    so far iv done the plugs tappets / valves and filters and still running rough know idea what it could be
    still drives fine when ya on the gas though any ideas.
    its got a 4 inch stainless snorkel with a big airbox and a 2.5 inch straight threw zorst with extractors no mufflers
    been like this for over a year but car is a weekender and drivin maybe once every 3 weeks

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many

     

  3. #2
    Expert
    Join Date
    Jan 2015
    Location
    Canberra
    Posts
    191
    Thanks
    0
    Thanked 37 Times in 26 Posts
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    The first step is to check the error codes on the computer. I think the plug is Nissan Consult, not OBD so you will need to buy/borrow a cable and software. I recently spent about a month troubleshooting rough idling issue, serviced plugs, lead, dissy cap, air and fuel filters, etc. I checked and there were no error codes on the computer, I even used a different fuel pump, changed out air flow meter, throttle position sensor, coil but no luck. In the end it turned out to be a bad EFI computer
    WARNING: Using a Tow Ball on any Snatch can KILL PEOPLE!

  4. #3
    Patrol God threedogs's Avatar
    Join Date
    Jun 2012
    Location
    Melb
    Posts
    31,636
    Thanks
    10,350
    Thanked 9,963 Times in 7,394 Posts
    Mentioned
    113 Post(s)
    Tagged
    2 Thread(s)
    Have you checked all the vacuum hoses they may be perished or become dislodged
    04 ST 3lt auto, not enough Mods to keep me happy, but getting there

  5. #4
    Beginner
    Join Date
    Jan 2017
    Location
    melbourne
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Jme gu cheers for that will look into it theres no vacum leaks that i can see and had a fairly good look over and under will look into getting a nissan consult and will see what happens

  6. #5
    Patrol God Dhuck's Avatar
    Join Date
    Nov 2010
    Location
    Crap Weather State
    Posts
    10,158
    Thanks
    223
    Thanked 1,237 Times in 994 Posts
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)
    Welcome to the forum mate.
    In the words of a Dhuck "QUACK".

  7. #6
    Patrol God mudnut's Avatar
    Join Date
    Aug 2012
    Location
    SW Vic.
    Posts
    7,821
    Thanks
    10,606
    Thanked 5,354 Times in 3,172 Posts
    Mentioned
    80 Post(s)
    Tagged
    1 Thread(s)
    Hello, and welcome to the forum. Try spraying a bit of WD40 around the inlet manifold and vacuum components with the engine running. If the engine tone changes it means that the engine has sucked the spray in and is burning it as fuel.
    My advice is: not to follow my advice.

  8. #7
    Patrol God threedogs's Avatar
    Join Date
    Jun 2012
    Location
    Melb
    Posts
    31,636
    Thanks
    10,350
    Thanked 9,963 Times in 7,394 Posts
    Mentioned
    113 Post(s)
    Tagged
    2 Thread(s)
    Quote Originally Posted by hummer.03 View Post
    Jme gu cheers for that will look into it theres no vacum leaks that i can see and had a fairly good look over and under will look into getting a nissan consult and will see what happens
    I think some Super Cheap stores can check and erase any errors
    Not sure if ECU talk would suit your Patrol maybe @Bob would be
    able to confirm or deny if ecu talk is suitable.
    04 ST 3lt auto, not enough Mods to keep me happy, but getting there

  9. #8
    Beginner
    Join Date
    Feb 2017
    Posts
    10
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Hey guys, I came from Indonesiaand this is also my 1st post. The reason I found this forum, excatly the same problem with my tb42e engine. The iddle is fluctuating and I found the injector #6 is not spraying. I have try to switch between them, and clearly its not the injector problem. It must be cable or sensor or ecu itself. Any body got any experience how to fix this? thanks

  10. #9
    Legendary 4bye4's Avatar
    Join Date
    Aug 2014
    Location
    Kingsley WA
    Posts
    4,857
    Thanks
    1,077
    Thanked 2,537 Times in 1,299 Posts
    Mentioned
    15 Post(s)
    Tagged
    1 Thread(s)
    G'day and welcome to the forum mate.
    2005 GU IV ST 3.0. Snorkel. Roof rack. Awning. Spots. Welded I/C. Dual batteries & VSR. UHF. Barn door hinge extension. Roof top spot lights. Rear drawers. 2" lift. NADS. EGT and boost gauges. Trans temp and water temp gauges. Provent 200 catch can. Rear ladder


    And crawling on the planet's face, some insects called the human race. Lost in time. And lost in space... and meaning.

  11. #10
    Beginner
    Join Date
    Feb 2017
    Posts
    10
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    thank you, looking forward if you have any advise or suggestions...

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •