-
23rd February 2017, 02:00 PM
#11
2012 GU 3L
Originally Posted by
threedogs
Very nice Patrol, be wary of your GMV as you add all this extra gear.
I think you'll find a re-map will give you greater gains over a chip.
Being a CRD may I suggest you buy a "SCAN gauge" a must for CRD owners
Thanks threedogs, I have done some reading and I think remapping looks to be the better option also, I'm getting the exhaust done next fortnight will keep everyone posted. Saving some dough now for the Kaymar rear bar with Twin Spare holder (does anyone recommend not getting the twin spare holder and getting 1 spare and 1 jerrycan holder?)
-
-
23rd February 2017 02:00 PM
# ADS
Circuit advertisement
-
23rd February 2017, 04:41 PM
#12
Patrol God
IMO I reckon twin wheel carriers in favour of the jerry can hplder.
If funds allow down the track fit a 75ltr AUX tank that should give
you 1000K plus range
Did you look at the Rasslar rear bar????
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
23rd October 2017, 10:31 PM
#13
2012 GU 3L
Better late than never I guess, finally getting the remap and 3" Exhaust done this Friday at Diesel Tuning Australia in VIC. Hopefully all goes well. After that thinking maybe the HPD Series 2 intercooler. All in good time I suppose.
-
The Following User Says Thank You to BigJ For This Useful Post:
-
24th October 2017, 10:21 AM
#14
Very nice. Looks like she just squeezes in under that car port.
2014 Titanium Y61 with all the fruit ................
-
-
24th October 2017, 11:11 AM
#15
2012 GU 3L
Originally Posted by
bazzaboy
Very nice. Looks like she just squeezes in under that car port.
Haha I actually had to cut the top front of the car port off to fit her under because the driveaway goes on a down slope. You may or may not see green paint on my roof rack
-
-
5th November 2017, 05:13 PM
#16
2012 GU 3L
King Brown 3" Exhaust and ECU Remap all done, results are really good, very happy with hp-f in dandenong.
-
The Following User Says Thank You to BigJ For This Useful Post:
Bigcol (5th November 2017)
-
11th November 2017, 09:37 PM
#17
2012 GU 3L
Received the Titan Rear Draws yesterday (Took 2 days) got to install them today, took me longer then I thought it would but part of that was me procrastinating lol.
23476804_1499986716753814_95354916_n.jpg
Picture of her sitting still
23484621_1499968266755659_681165673_o.jpg
Last edited by BigJ; 11th November 2017 at 10:04 PM.
2012 GU8 Patrol 3.0L
ECU Remap | 3" Exhaust | Nissan factory Bullbar | IPF Spotties | EFS Suspension 2" Lift | 33" BFG Mud Tyres w/ Sunraysias | Titan Rear Draws | Roof Rack | Redarc gauges | Roof lights | ----------- Coming Soon, UHF mounted to Outback Roof Console, Kaymar rear bar and HPD Series 2 Intercooler.
-
The Following User Says Thank You to BigJ For This Useful Post:
GQtdauto (16th November 2017)
-
12th November 2017, 10:08 AM
#18
Patrol Freak
Originally Posted by
BigJ
Thanks threedogs, I have done some reading and I think remapping looks to be the better option also, I'm getting the exhaust done next fortnight will keep everyone posted. Saving some dough now for the Kaymar rear bar with Twin Spare holder (does anyone recommend not getting the twin spare holder and getting 1 spare and 1 jerrycan holder?)
Had some rear bar detail here (now deleted), noted you bought one.
By the way get some webbing straps to tie down your fridge. Got a set of those draws not bad for the $$$s, noted though that the slide locking pin fell apart the other day it could not handle a couple of rough creek soak crossings. Using a bag between slide end and rear door at the moment.
You are doing well. Be interested in your boost behaviour and egt's post remap (when your foot settles down, I no its hard).
Last edited by Bidja; 12th November 2017 at 10:16 AM.
Reason: Deleted rear bar info
2008 GU WAG ST Manual CRD - To do the job
-
-
12th November 2017, 12:53 PM
#19
2012 GU 3L
Originally Posted by
Bidja
Had some rear bar detail here (now deleted), noted you bought one.
By the way get some webbing straps to tie down your fridge. Got a set of those draws not bad for the $$$s, noted though that the slide locking pin fell apart the other day it could not handle a couple of rough creek soak crossings. Using a bag between slide end and rear door at the moment.
You are doing well. Be interested in your boost behaviour and egt's post remap (when your foot settles down, I no its hard).
Haha thanks Bidja, I might head down to bunnings today and get some of those straps or search through the shed might have some around somewhere, The titan draws are smack on money wise. I didn't want to fork out $2000+ for a set of arb or other top draws so I bit the bullet and bought these, couldn't be any happier, plus the color looked really light blue on the pictures on 4WDsupacentre but turned out to be like a very dark color which surprised me. I will be on the lookout for the locking pin might even reinforce it while it's still new, thanks for letting me know.
2012 GU8 Patrol 3.0L
ECU Remap | 3" Exhaust | Nissan factory Bullbar | IPF Spotties | EFS Suspension 2" Lift | 33" BFG Mud Tyres w/ Sunraysias | Titan Rear Draws | Roof Rack | Redarc gauges | Roof lights | ----------- Coming Soon, UHF mounted to Outback Roof Console, Kaymar rear bar and HPD Series 2 Intercooler.
-
-
16th November 2017, 05:58 PM
#20
2012 GU 3L
Redarc Gauges arrived today EGT+Boost including temp sensor and Dual voltage plus the lighting control. Just gotta find someone to fit them now because I'm clueless with Auto Elec stuff.
REDARC.jpg
2012 GU8 Patrol 3.0L
ECU Remap | 3" Exhaust | Nissan factory Bullbar | IPF Spotties | EFS Suspension 2" Lift | 33" BFG Mud Tyres w/ Sunraysias | Titan Rear Draws | Roof Rack | Redarc gauges | Roof lights | ----------- Coming Soon, UHF mounted to Outback Roof Console, Kaymar rear bar and HPD Series 2 Intercooler.
-
The Following 3 Users Say Thank You to BigJ For This Useful Post:
AB (16th November 2017), Hodge (16th November 2017), Wine_maker (16th November 2017)