-
21st January 2017, 09:15 PM
#1
Patrol Guru
DTS td05 Turbo Flange?
Hi all long time lurker first time poster........
I bought a 2nd hand DTS turbo kit for a TD42 a while back but never fitted it.
I was told the turbo was a TD05 16G the housing has no marks to identify it at all.
I also acquired a dump pipe a while ago and it was sitting in a cupboard for ages.....today i went to see what else i needed to finish the job, i went to put the dump pipe on the turbo but it has a 5 bolt flange pattern (T25 pattern) unlike the dump pipe which has a 6 bolt pattern.
My question is does anyone know if any DTS tdo5s turbos came with 5 bolt pattern or is the turbo something else?16176816_10206554398977555_1737731532_n.jpgIMG_2353.pngIMG_2351.png
In any moment of decision, the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
Theodore Roosevelt
-
-
21st January 2017 09:15 PM
# ADS
Circuit advertisement
-
21st January 2017, 11:24 PM
#2
Smart like tractor
My old dts td05 has a 3 bolt dump flange. It also has a 12 blade turbine, yours has an 11 blade
96 GQ coil/Cab
08 G6eT
-
The Following User Says Thank You to Ben-e-boy For This Useful Post:
Family4x4 (21st January 2017)
-
21st January 2017, 11:33 PM
#3
Patrol Guru
Thanks Ben. I also have a TD05HR-16G6-9.8T from an evo 8 sitting in the shed the housing is different again, i am hoping that this housing
https://shop.mambatek.com/product.sc...&categoryId=-1
Will fit.
In any moment of decision, the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.
Theodore Roosevelt
-
-
22nd January 2017, 08:15 AM
#4
Patrol God
Hey Sean long time no see . Hope you're well mate.
-
The Following User Says Thank You to Hodge For This Useful Post:
Family4x4 (22nd January 2017)
-
22nd January 2017, 05:32 PM
#5
Hi Sean. Welcome back mate. Hope things are well.
-
The Following User Says Thank You to mudski For This Useful Post:
Family4x4 (22nd January 2017)