-
27th August 2022, 09:01 PM
#51
.........
-
-
27th August 2022 09:01 PM
# ADS
Circuit advertisement
-
27th August 2022, 09:29 PM
#52
Breadmaker Shaker
Originally Posted by
MB
For waffling on clarity
Accidentally bent my 30+ year old bestest Crowbar some 10 years ago and never looked back
Sent from my iPhone using Tapatalk
And they say Bonsai landscaping is childs play....
What is the charge? Eating a meal? A succulent Chinese meal??
-
The Following User Says Thank You to Plasnart For This Useful Post:
-
27th August 2022, 09:36 PM
#53
.........
-
The Following User Says Thank You to MB For This Useful Post:
Rossco (28th August 2022)
-
27th August 2022, 11:37 PM
#54
Patrol Guru
But bend it with psychic power alone, for more fun!
-
The Following User Says Thank You to BrazilianY60 For This Useful Post:
-
27th August 2022, 11:52 PM
#55
.........
-
-
30th August 2022, 04:21 AM
#56
Patrol Guru
Job done! Thank you lads! Turned the locking nut just one click and the play was gone.
It surprises me that there is no gasket on the hub mating surface.
20220828_105239.jpg
-
The Following 2 Users Say Thank You to BrazilianY60 For This Useful Post:
Cremulator (30th August 2022), MB (30th August 2022)
-
31st August 2022, 05:16 PM
#57
Originally Posted by
BrazilianY60
It surprises me that there is no gasket on the hub mating surface.
There should be...
worst case knock one up out of beer box (cardboard usually found on dozens, not the corrugated boxes that 24s come in...)
PITA, but a hole-punch set (scissors if you're a masochist) will have em knocked out pretty quick.
- 1990 LWB Safari flatdeck, TD42 -
- 1988 LWB 7-seat Safari, TD42 -
1989 LWB 5-Seat, TD42
-
The Following 2 Users Say Thank You to mihit For This Useful Post:
BrazilianY60 (31st August 2022), MB (1st September 2022)
-
1st September 2022, 01:38 PM
#58
my 2011 gu had no gasket there from new . i just put a thin wipe of wheel brg grease on the mating surfaces , that should stop or slow the progress the passage of water across the joint . i have had my hubs under water a few times and there was no signs of water ingress even without the grease when they were separated the first time . the parts hub housings are only alloy , be careful when handling that you don't ding the edges around the mating surfaces , it can cause them not to closley mate togeather again .
-
The Following 2 Users Say Thank You to nipagu7 For This Useful Post:
MB (1st September 2022), mihit (2nd September 2022)
-
1st September 2022, 06:43 PM
#59
.........
-
-
2nd September 2022, 12:01 PM
#60
the bonus with my method is that you have to empty a box of beer...
- 1990 LWB Safari flatdeck, TD42 -
- 1988 LWB 7-seat Safari, TD42 -
1989 LWB 5-Seat, TD42
-
The Following User Says Thank You to mihit For This Useful Post: