Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
asking for a mate.....are the engine mounts in a different position,if you do a engine swap?
Hey mate. I have done this conversion and yes, the mounts are different. We cut them out of the doner car and welded them into my wagon. Wasn't that hard just have to make sure you take measurements off the doner car before cutting them out! Seems obvious but i have heard stories. Good luck to your mate. Best thing I ever did!
I've done this conversion and yes the drivers side mount needs to be moved / adapted forward by about 15-25mm. Pays to measure it up. I cut off the RD mount and bought a brand new genuine nissan td42t mount from nissbits. Had that professionally welded on (better than the factory welding). Others simply make up a steel plate adapter and leave the RD28 mount in place.