-
3rd November 2016, 11:34 AM
#1
Turn - park signals install
Had to replace bulbar turn/park lights, they were rusted out as previous owner had them on wrong sides and upside down. I bought LEDs but the wiring clamp are different and wires are different colour, just wondering what the 3 ( y,br,w) are should be able to work it out from there.
-
-
3rd November 2016 11:34 AM
# ADS
Circuit advertisement
-
3rd November 2016, 01:17 PM
#2
I am he, fear me
It varies but yellow for turn, brown for clearance and white for earth is the more common.
Try yellow to 12 volt and white to earth and see what lights up (if it is the indicator LED's then the wiring will be as above)
Last edited by the evil twin; 3rd November 2016 at 01:20 PM.
Dolphins are so smart that within a few weeks of captivity, they can train people to stand on the very edge of the pool and throw them fish.
-
-
3rd November 2016, 04:16 PM
#3
Originally Posted by
the evil twin
It varies but yellow for turn, brown for clearance and white for earth is the more common.
Try yellow to 12 volt and white to earth and see what lights up (if it is the indicator LED's then the wiring will be as above)
Thanks will go try that, think I can figure out the old colours they're connecting too.
-