Distance from hub to guard

[Mc4by]

I would appreciate anyone with a GU (2002) with a 2 inch lift telling me the distance from the middle of the hub to the bottom of the guard.

[MB]

Give me 10mins mate, I'll go grab a tape from the shed and check Mrs MB's for ya!

[MB]

580mm rear / 570mm front. (Rear bags currently @ 5psi) Although very heavy WA bar, winch, steps, Titan rear draws, empty Waeco & steel rack to consider mate! Sent from my iPhone using Tapatalk

[Mc4by]

I appreciate the effort MB.
I am at 560 front and rear...with Titan drawers in the rear.
The current springs and shocks are old with no obvious markings so no idea what they could be.
I am running 265/75/16 tyres.

[AB]

I appreciate the effort MB. I am at 560 front and rear...with Titan drawers in the rear. The current springs and shocks are old with no obvious markings so no idea what they could be. I am running 265/75/16 tyres.

Sounds like a 2" then which could be sagging a bit with age.

[MB]

Too easy mate!
These were RidePro's from Patrol Apart about 6 months ago. We put my old Koni 88s I think they are in it too.

[Mc4by]

Does that mean I need new shocks, new springs or both?

[MB]

Not sure mate, not much of a mechanic me.
560mm doesn't sound too bad, not much in it really. I'd say springs if anything, some good brand shocks can be redone too!

[Mc4by]

It can wait a little longer given it's only about 20 mm.
Thanks again for taking the time to measure MB.

[MB]

No probs!
It's realistically probably only 10mm difference between us because our rear bags at 5psi do still push the arse end up that extra 10mm when no trailer is on.