Turbo Upgrades for the GUIV TD42Ti

[AB]

Yes mate I hooked it all up and just drove it to the exhaust shop with no dump pipe.

[nissannewby]

The Radius ones are fine and will do the job. Have a look also at on track fabrications in wa. Im not sure if 4by fab are still going but they use to do an ok box.

Anyone feel like sending me a radius snorkel?

[nissannewby]

yeah right so i will need to mount the turbo and get it to an exhaust shop for a Dump pipe to be fitted? @AB is that what you did? i think i read that in your build. Any way i can get this Dump made prior?

Im a little time Poor, really keen to get this Turbo on before the Christmas Break if i can as I'm heading to Cape Jaffa in SA on the 27th of December for a Week on the Beach driving and want the new Turbo setup for then if i can.


Mat what do you think of the round airbox that Radius makes? there is a pic on their FB page, i will see if i can find it and post it her.

Even just getting the turbo fitted will get rid of your egt problem without the other gear. You can pretty much max the stock fuel pump and still have now issue due to how well the bw works.

[MudRunnerTD]

The Radius ones are fine and will do the job. Have a look also at on track fabrications in wa. Im not sure if 4by fab are still going but they use to do an ok box.

Anyone feel like sending me a radius snorkel?

This is looking like a great price mate!!

https://www.snorked.com.au

[MudRunnerTD]

I run the Radius Snorkel, I bought the 4inch ram head local for around $60 too.... My air box is the FATZ box.
Attachment 69698

As for the price difference in snorkels. My guess is that the FATZ snorkel has hidden welds. More time and care is need in this. My Radius snorkel you can see where the joins are. Doesn't bother me though.

Thanks Mark. did you have to get a slight bend at the top to straighten the Ram head? or just cut it off? i thought yours sat straight and level like it should?

[MudRunnerTD]

The Radius fab snorkel was $690 from memory...
Attachment 69636

Just had a look at this pic again. So you told Radius you were going to fit a Ram head and he made it to suit?

[mudski]

Just had a look at this pic again. So you told Radius you were going to fit a Ram head and he made it to suit?

Correct. The ram head is straight. Just looks off in the pic....

Sent from my GT-N7105T using Tapatalk

[MudRunnerTD]

might have just bought a Borg Warner EFR6758...........

Thanks for your time Matty, legend mate. AB holy shit mate! lets do this!

[Rossco]

might have just bought a Borg Warner EFR6758...........

Thanks for your time Matty, legend mate. AB holy shit mate! lets do this!

Ooh nice one Daz, turbo upgrade will have to be on the cards for mine at some point and definatly know it'll be one of these.

[MudRunnerTD]

@nissannewby it seems i did not place that second order last night mate. can you confirm this is the actuator please and i will rebuild the add-on order

http://gcg.com.au/petrol-performance...i-32psi-detail

cheers bud