-
1st November 2016, 07:38 AM
#21
Patrol God
Originally Posted by
MudRunnerTD
@
Hodge do you have a bigger Turbo on yours mate?
Hey Daz.
No mate. The only upgrades I have are the CC intercooler/scoop and a JPC high flow water pump all with a good tune.
But,as per my previous post I am watching the thread with much interest!
Also, I will add, the CC intercooler tamed the EGT's big time and gained a couple of ponies with it too. Pricey, but good investment.
Have you also considered a bigger air intake ?
-
The Following User Says Thank You to Hodge For This Useful Post:
MudRunnerTD (1st November 2016)
-
1st November 2016 07:38 AM
# ADS
Circuit advertisement
-
1st November 2016, 08:10 AM
#22
Moderator
Originally Posted by
Hodge
Hey Daz.
No mate. The only upgrades I have are the CC intercooler/scoop and a JPC high flow water pump all with a good tune.
But,as per my previous post I am watching the thread with much interest!
Also, I will add, the CC intercooler tamed the EGT's big time and gained a couple of ponies with it too. Pricey, but good investment.
Have you also considered a bigger air intake ?
Hi mate, no I haven't considered intake mods really. I have a billet air box lid with a cobra head which I got off @Stropp when he upgraded his airbox. Stropp did you do your airbox upgrade as a stand alone mod? Did you notice a huge change? What snorkel have you got feeding it?
Eric what sort of power did you make with your tune?
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
-
1st November 2016, 08:33 AM
#23
Moderator
Originally Posted by
AB
I think a bit over 2k for the BW Dazz plus a couple or more hundred for t5 adaptor, larger actuator, short bracket and other goodies so more on the 2.5k mark.
Can you help me with a parts list and where to get all that mate. When the time comes I need to not loose any time parked up as it's the Daily for Naomi and I can afford to not have everything I need to bolt up and go.
Last edited by MudRunnerTD; 1st November 2016 at 09:38 AM.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
-
1st November 2016, 09:10 AM
#24
Patrol Guru
Originally Posted by
MB
PM already sent for 4.3s possible off mate Daz!
Hi daz my diff / diff gears are of my 2.8 litre and are 4.625:1 the 4.375:1 gears you are after are from the 3 litre autos
Cheers Kimbo
98 GU ST wagon 6.5TD chev 5 speed manual dual batteries storage drawers big red air compressor 9L tank millweld front and rear bars millweld 4" snorkel 4" air box 3" tough dog suspension lift drop box and hybrid radius arms 12000Lb winch ARB front air locker Alpine MP3 player amp and a good set of speakers GME 2 way The list goes on
-
The Following User Says Thank You to Kimbo63 For This Useful Post:
MudRunnerTD (1st November 2016)
-
1st November 2016, 09:37 AM
#25
Moderator
Originally Posted by
Kimbo63
Hi daz my diff / diff gears are of my 2.8 litre and are 4.625:1 the 4.375:1 gears you are after are from the 3 litre autos
Cheers Kimbo
Thanks Kimbo. You should get good coin for the 4.6s mate, everyone wants them.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
The Following User Says Thank You to MudRunnerTD For This Useful Post:
Kimbo63 (1st November 2016)
-
1st November 2016, 11:10 AM
#26
Administrator
Originally Posted by
MudRunnerTD
Can you help me with a parts list and where to get all that mate. When the time comes I need to not loose any time parked up as it's the Daily for Naomi and I can afford to not have everything I need to bolt up and go.
Sure no probs
-
-
1st November 2016, 04:31 PM
#27
Patrol God
Originally Posted by
MudRunnerTD
Eric what sort of power did you make with your tune?
I went up from 75kW to about 100kW with just a tune after fitting a 3" exhaust.
Then after fitting the CC intercooler they easily reached 115-120kW, but apparently the car was gasping for air at that stage or beyond.
The standard HT18 was at its peak range so they suggested if I want more, I'd need a better turbo and/or open up the air intake.
The IP was also a limiting factor.
-
The Following User Says Thank You to Hodge For This Useful Post:
MudRunnerTD (1st November 2016)
-
1st November 2016, 04:33 PM
#28
The 747
When you do this work Darren I would suggest to take it to diesel tech for a tune up. I don't think the tune you had was very good.
-
The Following User Says Thank You to Winnie For This Useful Post:
MudRunnerTD (1st November 2016)
-
1st November 2016, 04:52 PM
#29
Administrator
-
The Following 2 Users Say Thank You to AB For This Useful Post:
Hodge (1st November 2016), MudRunnerTD (1st November 2016)
-
1st November 2016, 05:06 PM
#30
Administrator
Just make sure you get 38mm bolt spacing for the oil drain and gasket.
I think I also have a set of M8 x 1.25 studs too.
Then Pirtek is your new friend in plumbing it up and I can help you there too with exact fittings and lengths, etc.
-
The Following User Says Thank You to AB For This Useful Post:
MudRunnerTD (1st November 2016)