-
30th January 2021, 08:27 PM
#631
Patrol God
Originally Posted by
DSPIES
Gday folks,
given the interest in the BW setup, is there anyone in Melbourne doing a drive in drive out install yet?
Hey mate.
When I had intentions of doing it , I rang around to several places and nobody wanted to touch the job.
I made it clear ,I'd have all the parts etc ...
From memory I rang eastern turbo , Mtq, jpc, .
They all gave me the spiel about why I'd go down that path with all the already off the shelf kits available etc .
I spoke to dieseltec, and he was somewhat keen ,. It did say there is a fair bit of work involved so... Would cost a chunk of $$$.
Sent from my Pixel 3a XL using Tapatalk
-
-
30th January 2021 08:27 PM
# ADS
Circuit advertisement
-
31st January 2021, 11:31 AM
#632
thanks Hodge.
after they gave you the speil about their off the shelf kits, did they lead into complaining about online retailers killing bricks and mortar retailers. It just seems to me that if there is another product out there (BW), which is sought after, a retailer or installer would want to get on board and make a bit of coin out of selling/installing it, rather than directing the consumer back to a product the consumer isn't 100% keen on.
I've also had a look at a UFI 18G with an intercooler and to be honest, there's a fair bit of coin in getting that installed too. I'd just rather drop the coin on a product i think i'd be happier with.
Unfortunately i don't have the mechanical skills, tools or confidence to deal with sh*t if the installer got halfway through the install and had to give me a call to say something was missing or the piping wasn't right. My concern is heightened when there isn't a 'kit' available. Hence i appreciate the installer also adds a few $s to take on the risk and previous R&D for getting the kit/install right.
thanks again.
-
-
1st February 2021, 08:10 PM
#633
Patrol God
Originally Posted by
Hodge
Hey mate.
When I had intentions of doing it , I rang around to several places and nobody wanted to touch the job.
I made it clear ,I'd have all the parts etc ...
From memory I rang eastern turbo , Mtq, jpc, .
They all gave me the spiel about why I'd go down that path with all the already off the shelf kits available etc .
I spoke to dieseltec, and he was somewhat keen ,. It did say there is a fair bit of work involved so... Would cost a chunk of $$$.
Sent from my Pixel 3a XL using Tapatalk
Looking back I should have done this when the chance presented itself. The rep I use to get the borg Warner's through at mtq was keen to do a kit. Unfortunately I didn't have the time to give him what he needed. This would have required a few variants of patrols with td42s. Then a standard kit could have been sorted.
-
The Following 2 Users Say Thank You to nissannewby For This Useful Post:
Hodge (2nd February 2021), MB (1st February 2021)
-
2nd February 2021, 11:05 PM
#634
.........
-
The Following User Says Thank You to MB For This Useful Post:
Hodge (3rd February 2021)