GQ - TI - Rear Stabilizer Disconnect Question

[NissanGQ4.2]

Quick Q on the GQ TI Rear Stabilizer Disconnect

Firstly, does anyone know how #1 in my pic comes off, I assume undo the 4 bolts but what holds the cable in?

Secondly, anyone know the best method of replacing the shaft with the ball joint that attaches 2 the rear stabilizer bar ( Pic 2 )? I assume this part can't be bought

GQ Rear Suspension.jpg


Cheers

Toddie

[liftlid]

Easiest way to remove cable from unit without removing cable from car is to pull cover off after manipulating unit from bracket (yes it is a Bugger to do) once out cable and rod can be removed.

Don't know if you can get new replacement maybe try Nissan, when I broke mine complete units were $900 so I welded on some shock eyes and reconfigured sway bar

[NissanGQ4.2]

Easiest way to remove cable from unit without removing cable from car is to pull cover off after manipulating unit from bracket (yes it is a Bugger to do) once out cable and rod can be removed.

Don't know if you can get new replacement maybe try Nissan, when I broke mine complete units were $900 so I welded on some shock eyes and reconfigured sway bar

Yeh seen your post on here with the shock eyes, theirs gotta be something simpler than that

[liftlid]

Yeh seen your post on here with the shock eyes, theirs gotta be something simpler than that

Yep $900 bucks simpler, unless you can get 2nd hand