looking at new bullbar and just found this one...

[Dan02]

Have been shopping around for a steel bar as everyone keeps telling me I should have one, so have been doing the rounds and can't seem to go past the ARB for quality so seriously considering the commercial bar, but the MCC Rocker looks awesome as does the xrox,

I really liked the xrox but wanted the 3 loop option which they don't do... but just about decision time I stumble across this brand RAslarr which caught my eye so sent them an email for more info' . They shot me back a few photos and prices of their latest model bar. So now waiting to see if it gets the thumbs up from the workshop. Its made in Aus in Vic. anyway just thought this might be interesting for anyone else in the hunt for a decent (i hope) locally made bar under $1500

[bazzaboy]

Nice bar, but is there anywhere to mount lights under the the hoops? The law is getting tough in NSW with lights above the hoops, maybe OK in QLD?

[Touses]

Nice bar, but is there anywhere to mount lights under the the hoops? The law is getting tough in NSW with lights above the hoops, maybe OK in QLD?

No boys, no lights above the bar in Qld. Got pinged for it a few months back!

[Dan02]

Nice bar, but is there anywhere to mount lights under the the hoops? The law is getting tough in NSW with lights above the hoops, maybe OK in QLD?

I recon you could fill those two holes in the bar fill in plates with a couple of spotties

[MudRunnerTD]

Check to make sure the Raslaar bar is ADR Compliant for your Airbags, i can't remember if his are.
@Winnie might have an opinion on the Raslaar bar work..... he has a bit of it.

[threedogs]

Im not 100% sure the Rasslar bullbar is ADR because of the angle its on.
I came across this problem with a friend and his Y62 wagon

[Winnie]

Im not 100% sure the Rasslar bullbar is ADR because of the angle its on.
I came across this problem with a friend and his Y62 wagon

Raslarr bar is not ADR compliant.
I've got a bit of his barwork on my GQ, the quality of the welds etc is really good, as a company he was pretty difficult to deal with. The powdercoat all fell off in a week too.

[threedogs]

Raslarr bar is not ADR compliant.
I've got a bit of his barwork on my GQ, the quality of the welds etc is really good, as a company he was pretty difficult to deal with. The powdercoat all fell off in a week too.

The trouble with getting powder coating to stick is usually they cant get enough
heat into the steel to make it "stick", maybe a 2pack paint thats chip proof, even POR15
would be perfect IMO

[Dan02]

in the email they sent back says its fully ADR compliant, at least that new one in the photos is. Was going to ask em how much to gal coat it before sending up as I recon I could hit it with a spray can to match colour

[MudRunnerTD]

in the email they sent back says its fully ADR compliant, at least that new one in the photos is. Was going to ask em how much to gal coat it before sending up as I recon I could hit it with a spray can to match colour

Specifically ask him about being Airbag Compliant.

Ask him for his Certificate number or reference to compliance, this should be readily available for him to send you.