-
1st August 2016, 05:56 PM
#1
Expert
Help needed on Glow Plugs.
2001 TD4.2t I have done the test light test and all Glow Plugs the test light lights up. I have now removed them all to test the continuity.
The result is, from firewall 15.2Ω - 30.2Ω - 02.5Ω - 01.1Ω - 02.4Ω - 00.0Ω to front.
Dose this show there all ok or is there a problem as there is a large difference between them, but the test light shows all ok.
-
The Following User Says Thank You to janderson For This Useful Post:
threedogs (2nd August 2016)
-
1st August 2016 05:56 PM
# ADS
Circuit advertisement
-
1st August 2016, 06:11 PM
#2
G'day,
Continuity should exist:
Approximately 0.85Ω [at 25°C (77°F)]
I would say you need a new set of glow plugs!
Regards
-
The Following User Says Thank You to Rumcajs For This Useful Post:
janderson (1st August 2016)