-
27th July 2016, 10:43 AM
#1
Installing Catch Can ZD30
Guys I just want to confirm that the hose in the attached in pics is the hose I place my catch can in line with.
Thanks.
pcv1.jpg
and ....
pcv2.jpg
Also, what can i use to clean my intercooler and pipes/hoses if I find they are all full of oil and crap?
Thanks for any help.
-
-
27th July 2016 10:43 AM
# ADS
Circuit advertisement
-
27th July 2016, 12:10 PM
#2
pretty sure mine was only the first photo. hopefully i've done it right haha
-
-
27th July 2016, 12:40 PM
#3
It's the same hose, the 2nd pic just shows where it comes from.
-
-
27th July 2016, 02:36 PM
#4
Originally Posted by
10G
It's the same hose, the 2nd pic just shows where it comes from.
Ha, yeah you're right. photo is a bit misleading when you don't look closely.
-
-
28th July 2016, 03:45 PM
#5
No takers???
Most of the pics I've seen have pointed to a hose coming out of an alloy block at right angles to the motor
-
-
28th July 2016, 04:46 PM
#6
If that hoes goes into the air intake hose, on the engine side of the intake hose, then thats the one. If you follow it along from the intake it goes into the rocker cover.
Sent from my GT-N7105T using Tapatalk
-