-
19th July 2016, 07:46 AM
#21
I have one of the USA branded
Well know branded winch on my patrol
Retail is over $1500
What a waste of time and money
Never again
I will go with the cheaper models in future and save my money
-
-
19th July 2016 07:46 AM
# ADS
Circuit advertisement
-
19th July 2016, 09:42 AM
#22
Patrol Guru
Yeah No Dramas Kallen thanks again 👍🏼
-
The Following User Says Thank You to Sprock For This Useful Post:
BigRAWesty (21st July 2016)
-
21st September 2016, 10:29 PM
#23
Advanced
I read a while ago (a number of years I think) that one batch of aldi winches were re-branded iron-man winches.
Depends who aldi get a good deal from.
Check it out on the net and some of the other forums have discussions on them.
Sent from my A1601 using Tapatalk
Last edited by Dirtydog16; 15th October 2016 at 08:29 AM.
-
-
22nd September 2016, 04:24 PM
#24
I ran two Aldi winches on two Prado's over ten years. Never had an issue with either one. If the Warn ever died on my Patrol I would not hesitate replacing it with an Aldi unit. I think the most important thing with the cheaper winches is to pull them apart when new, replace the grease with quality stuff, and apply a bead of sealant on all gaskets/seals.
2014 Titanium Y61 with all the fruit ................
-
-
22nd September 2016, 06:20 PM
#25
Patrol God
Theres a mob at the back of Tullamarine Park drive that see 12,00lb winches for about $400
Place is called Radum they import chinese equipment like pipe benders,, 12t press'sPlenty of gear
thats for sure
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
29th September 2016, 02:45 AM
#26
Legendary
Originally Posted by
Dirtydog16
I read a while ago (a number of years I think) that one batch of aldi winches were re-branded iron-man winches.
Depends who aldi get a good deal from.
Check it out on the net and some if the other forums have discussions on them.
Sent from my A1601 using Tapatalk
Yep, I've heard the same, might have been around 2010ish.
Sent from my XT1068 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
-
4th October 2016, 12:04 PM
#27
Beginner
I have just purchased the domin8er just need to figure how to install on a factory bullbar.
-
-
8th October 2016, 02:02 AM
#28
Beginner
Just wondering if anyone has the new domin8r x winch and if so can you rotate the gear box i read some where that you cant bit just thought id ask the question.
Cheers in advance
-
-
8th October 2016, 12:02 PM
#29
Expert
Originally Posted by
Andy76
Just wondering if anyone has the new domin8r x winch and if so can you rotate the gear box i read some where that you cant bit just thought id ask the question.
Cheers in advance
Not sure how new the one you're talking about is, however I bought one over a year ago and you could rotate them. I did a write up on installing into a std Nissan winch bar. You'll also find a thread on installing into an alloy bar using a winch cradle if you have a search.
2007 GU ST-S 4.8 Patrol.
40mm heavy duty springs, Dual batteries,
140 ltr fuel tank,Custom 60ltr water tank, draws, cargo barrier, bull bar, IPF spotties, UHF.
-
-
9th October 2016, 02:03 AM
#30
Beginner
Only just had it delivered ill check out your post and take it from there.
Thanks
-