missfire gq 4.2 petrol

[98patrol]

I had a similar issue in my gq when it's was 4.2 carby .
It was the points not opening , cleaned them with emery paper , which fixed it .

[GQ88]

Well the others have covered most of it all add on more, their is a covered spring atached to the carby at the back near the top whitch is your lean/ rich mixture lossen the three scrws and rotate the plastic cover. also might have water in the carby (hope not) strip down and clean...

well i hope you find the answer good luck

[rusty_nail]

Well the others have covered most of it all add on more, their is a covered spring atached to the carby at the back near the top whitch is your lean/ rich mixture lossen the three scrws and rotate the plastic cover. also might have water in the carby (hope not) strip down and clean...

well i hope you find the answer good luck

hi GQ88,

im pretty sure hes sorted the problem out after 2 years haha.

just somthing we ask of our members on here mate. could you please head over to the introduction section and introduce yourself.

cheers mate

rusty