-
2nd June 2016, 01:40 PM
#21
Patrol God
Ok Cat is on its way..
200cpi stainless cat, 4" body and 3" in and out..
Last edited by BigRAWesty; 2nd June 2016 at 04:13 PM.
Cheers
Kallen Westbrook
-
-
2nd June 2016 01:40 PM
# ADS
Circuit advertisement
-
2nd June 2016, 03:46 PM
#22
Dribble Master
Originally Posted by
bigguwesty
Ok Cat is not on its way..
200cpi stainless cat, 4" body and 3" in and out..
So why tell us if it's not coming?
-
The Following 2 Users Say Thank You to Clunk For This Useful Post:
BigRAWesty (2nd June 2016), lhurley (2nd June 2016)
-
2nd June 2016, 04:07 PM
#23
Patrol God
Originally Posted by
bigguwesty
Unsure on egt as yet to fit gauge..
Water temp doesn't move from the normal 88-90 though..
I can't hear the turbo spooling like I can under power.
Scangauge is reading corrected boost so you may be onto something..
I'd be fitting some gauges to monitor your EGTs etc before you start all these mods
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
2nd June 2016, 04:14 PM
#24
Patrol God
Originally Posted by
Clunk
So why tell us if it's not coming?
Lol. Type. Dunno how but it's on its way..
Originally Posted by
threedogs
I'd be fitting some gauges to monitor your EGTs etc before you start all these mods
Yes should have.. But got to keen. Lol..
Cats going in and gauges too..
All on the way..
Exhaust is done.
-
-
2nd June 2016, 08:50 PM
#25
Patrol Freak
Hey did you end up fitting a Dawes or anything to fix your boosting issues or hoping the cat will fix it?
Sent from my iPhone using Tapatalk
2008 GU6 3.0 CRD AUTO | Safari Snorkel | 2" Ironman lift kit | Runva 11XP Winch | 33" MTZ's | Full Length Roof Rack | GME TX3200 | 30" LED Light Bar |
-
-
2nd June 2016, 09:44 PM
#26
Patrol God
Originally Posted by
Bacho86
Hey did you end up fitting a Dawes or anything to fix your boosting issues or hoping the cat will fix it?
Sent from my iPhone using Tapatalk
Hoping the cat will fix the issue..
-
-
2nd June 2016, 09:56 PM
#27
The cat wont fix your issue. I dont see 20 psi as an issue aswell. If it were 10psi i would.
Sent from my SM-P600 using Tapatalk
-
-
2nd June 2016, 10:12 PM
#28
Patrol God
Originally Posted by
mudski
The cat wont fix your issue. I dont see 20 psi as an issue aswell. If it were 10psi i would.
Sent from my SM-P600 using Tapatalk
It's not really an issue no, but it's not wanted.. happy with stock.
But the cat will assist the lack off back pressure and that has to be only reason why it's over spooling while coasting..
Not sure if it'll fix it or not.. I'm hoping it does but if not then it'll be valves to take control..
-
The Following User Says Thank You to BigRAWesty For This Useful Post:
-
3rd June 2016, 07:36 AM
#29
Patrol Freak
Originally Posted by
bigguwesty
It's not really an issue no, but it's not wanted.. happy with stock.
But the cat will assist the lack off back pressure and that has to be only reason why it's over spooling while coasting..
Not sure if it'll fix it or not.. I'm hoping it does but if not then it'll be valves to take control..
All rite, interested to hear how you go.
Did you ever consider just doing the 2.75" exhaust upgrade?
People seem to have a lot less issues with this on the CRD, but I think only Beaudesert sell them at around $1200, which is close to double what you pay for a eBay 3" exhaust...
Sent from my iPhone using Tapatalk
2008 GU6 3.0 CRD AUTO | Safari Snorkel | 2" Ironman lift kit | Runva 11XP Winch | 33" MTZ's | Full Length Roof Rack | GME TX3200 | 30" LED Light Bar |
-
The Following 3 Users Say Thank You to Bacho86 For This Useful Post:
BigRAWesty (3rd June 2016), Maxhead (3rd June 2016), threedogs (10th August 2016)
-
21st June 2016, 12:14 PM
#30
Was there an outcome to this As mine (2012 CRD ) does the same boost climbs to 25 PSI
-