-
21st April 2016, 12:54 PM
#1
Catch Can Block..???
Hi Guys,
I just purchased a Provent (knock off) from eBay , obviously plumbing the inlet and outlet are simple , but im just wondering as the kit comes with no hoses, how anyone that has one went about blocking the 12.5mm drain hole.??
I was thinking maybe a clamp, piece of hose and a small ball valve or something similar.......any help or info much appreciated.
Cheers,
Ad.
-
-
21st April 2016 12:54 PM
# ADS
Circuit advertisement
-
21st April 2016, 01:05 PM
#2
Get some 1/2 inch hose and run it down the chassis rail. Put a ball valve tap on it so you can drain it with ease. Thats how I have mine. Its runs down in between the inner guard and chassis rail and sits over where the sway bar mount is on the chassis rail.
-
The Following User Says Thank You to mudski For This Useful Post:
-
21st April 2016, 03:57 PM
#3
Patrol God
Same with mine.. easy to drain.. easy to see..
-
The Following User Says Thank You to BigRAWesty For This Useful Post:
-
22nd April 2016, 08:00 AM
#4
Expert
Yep, just the same. Extended down into the wheel arch area against the chassis rail, with a tidy external cap on the end.
-
The Following User Says Thank You to Daveyboyjunior For This Useful Post:
BigRAWesty (22nd April 2016)
-
22nd April 2016, 12:56 PM
#5
i just went to bunnings and got a irrigation valve with barbed fittings moulded in for a couple of bucks , works perfect , never leaked a drop .
-
-
22nd April 2016, 02:15 PM
#6
Originally Posted by
nipagu7
i just went to bunnings and got a irrigation valve with barbed fittings moulded in for a couple of bucks , works perfect , never leaked a drop .
Sounds like a plan.....
-
-
25th April 2016, 08:41 AM
#7
-
-
25th April 2016, 06:59 PM
#8
Legendary
300_0093.JPG
this is mine
2007 GU 6 /ST-L / MYO8 / DIESEL/AUTO /MOONSTONE /pro vent 200
OH LEATHER IS NICE
-
The Following User Says Thank You to my third 256 For This Useful Post: