-
10th April 2016, 10:19 AM
#1
Plastic inner guards
Just done cleaning cow dung from under my guards. Noticed there is no inner/rear plastic guard on left rear.
Anyone with a 2006 or so GU, can you confirm I SHOULD have an inner liner. Thanks
Had neighbor roll his Great Wall into the rear bumper. When I got it back from panel shop with new bumper, I did not check under. My bad!!. Maybe they needed access and it was easiest to just pull it off.
GU IV 2006; 3.0 DDi ST-S; Nissan Snorkel, Bull Bar and Tow Bar; Warn 8,000# Winch with Dyneema rope; Auber EGT, Boost and dual Battery gauges; Provent 200; Dual Batteries; Three Dogs recovery points; Rear Springs +20% load; Outback drawers and Cargo Barrier; UHF; [GPS, Radio, CD, Bluetooth, SD, USB] floor extension; Alloy roof rack
"Smart people know what they don't know"
-
-
10th April 2016 10:19 AM
# ADS
Circuit advertisement
-
10th April 2016, 10:48 AM
#2
Patrol Guru
No inner guards on mine only a cover on the right hand side for the fuel filler hoses
98 GU ST wagon 6.5TD chev 5 speed manual dual batteries storage drawers big red air compressor 9L tank millweld front and rear bars millweld 4" snorkel 4" air box 3" tough dog suspension lift drop box and hybrid radius arms 12000Lb winch ARB front air locker Alpine MP3 player amp and a good set of speakers GME 2 way The list goes on
-
The Following User Says Thank You to Kimbo63 For This Useful Post:
Dr Gary (10th April 2016)
-
10th April 2016, 10:58 AM
#3
Patrol God
There is a small flimsy inner guard about 250mm
long and costs about $28 from Mr Nissan
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
The Following User Says Thank You to threedogs For This Useful Post:
Dr Gary (10th April 2016)
-
10th April 2016, 11:00 AM
#4
Patrol Guru
Originally Posted by
threedogs
There is a small flimsy inner guard about 250mm
long and costs about $28 from Mr Nissan
Is this on the left TD photo please
98 GU ST wagon 6.5TD chev 5 speed manual dual batteries storage drawers big red air compressor 9L tank millweld front and rear bars millweld 4" snorkel 4" air box 3" tough dog suspension lift drop box and hybrid radius arms 12000Lb winch ARB front air locker Alpine MP3 player amp and a good set of speakers GME 2 way The list goes on
-
-
10th April 2016, 12:52 PM
#5
Patrol Freak
Nothin on my 07 inner rear passenger guard either -- only on the drivers side
Passenger side
Drivers side
Sent from my iPhone using Tapatalk
2008 GU6 3.0 CRD AUTO | Safari Snorkel | 2" Ironman lift kit | Runva 11XP Winch | 33" MTZ's | Full Length Roof Rack | GME TX3200 | 30" LED Light Bar |
-
The Following User Says Thank You to Bacho86 For This Useful Post:
Kimbo63 (10th April 2016)
-
10th April 2016, 01:49 PM
#6
Patrol God
Originally Posted by
Kimbo63
Is this on the left TD photo please
The left looks like there shoulds be something there a few spare holes
here and there. Sorry cant bend down to get a picture
RRHS is same as above
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
The Following User Says Thank You to threedogs For This Useful Post:
Dr Gary (10th April 2016)
-
11th April 2016, 10:41 PM
#7
Originally Posted by
threedogs
The left looks like there shoulds be something there a few spare holes
here and there. Sorry cant bend down to get a picture
RRHS is same as above
Yeah mine is the same on the LHS. Looks like something should be there but there isn't. Every Patrol that comes by to pick parts up from me I have been looking at and I haven't seen one. Theres nothing in the parts program too.
-
The Following 3 Users Say Thank You to mudski For This Useful Post:
Bacho86 (11th April 2016), Kimbo63 (11th April 2016), stevemc181 (20th May 2017)