hi guys, where is the best place to pick up boost pressure from on a 2001 3.0l di?
Cheers
Cooper
hi guys, where is the best place to pick up boost pressure from on a 2001 3.0l di?
Cheers
Cooper
http://www.ebay.com.au/itm/331773948...%3AMEBIDX%3AIT
Found this to be the neatest way,
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
Cheers, do i need anything else with it other than a boost gauge and will any boost gauge kit from ebay fit?
Yep you should be right I used 4mm efi fuel line and then clamped that to the teflon tubing or cable tie
or you could use a 1/8th fitting that excepts an olive type join
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
Weld a bung in the front ic pipe. If you have access to a welder....
Sent from my SM-P600 using Tapatalk
i think im going to weld a bung in to save money, but what pipe the i weld it into? the outlet or inlet side?
Intercooler.PNGIntercooler.PNG
There is a spot under the IC that you can drill and tap as well.
thats where mine was originally.
OOI do you have a tigged intercooler, is it the original
and oily
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
it is the original intercooler
I had the bung in the front pipe where it says outlet pipe. The pipe after that short rubber section.
Sent from my SM-P600 using Tapatalk
BigRAWesty (7th March 2016)
cheers guys