-
21st February 2016, 08:31 PM
#1
NADS Installer Sydney
Hi
Looking for suggestions where i can go close to Parramatta to get all the NADS stuff fitted. I'm not keen on trying to do it myself will probably cause more damage than good ☺ Its an 05 ZD30 I'm looking at getting the work done to.
If there is anyone close by to me im happy to pay to get the work done ☺
Cheers
-
-
21st February 2016 08:31 PM
# ADS
Circuit advertisement
-
21st February 2016, 11:51 PM
#2
Total care 4wd, 2 Artisan rd, Seven Hills.
Sent from my iPad using Tapatalk
-
-
22nd February 2016, 04:02 PM
#3
Patrol God
Is Hornsby near Parramatta no idea on nsw geography
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
22nd February 2016, 05:25 PM
#4
I am he, fear me
Originally Posted by
threedogs
Is Hornsby near Parramatta no idea on nsw geography
Sort of... but Seven Hills is closer
Go the Eels
Dolphins are so smart that within a few weeks of captivity, they can train people to stand on the very edge of the pool and throw them fish.
-
-
22nd February 2016, 08:36 PM
#5
Not very close but willing to drive if they are reasonable. So far have had a few rough prices either really high or the guys have never heard of NADS and have not fitted the stuff before.
-
-
22nd February 2016, 08:38 PM
#6
Rotaredom
You could try DSV 4X4
Unit 8/4 Garling Road Kings Park
Sydney, Australia
(02) 8678 7956
Time is never wasted when your wasted all the time
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
-
22nd February 2016, 08:44 PM
#7
Originally Posted by
Pavloh
Not very close but willing to drive if they are reasonable. So far have had a few rough prices either really high or the guys have never heard of NADS and have not fitted the stuff before.
You will find most workshops wont fit it because they have never heard of it. Which i find hard to believe as any late model diesel ute can have a Dawes fitted and reep the benefits. But not many workshops seem to know about it.
If your mechanically minded, you are better of doing it yourself and seeking advice from others to help you along the way.
Sent from my SM-P600 using Tapatalk
-
-
22nd February 2016, 09:06 PM
#8
Pretty crazy i know.
If there is anyone aroung the parramatta area that would spend a day to help me out with this stuff at home i would be happy to compensate and hydrate with some beers ☺
-
The Following User Says Thank You to Pavloh For This Useful Post:
mudski (22nd February 2016)
-
23rd February 2016, 10:01 AM
#9
Patrol Freak
i'm close to Campbelltown, can give you a hand to install it never done one but it should have instructions or some one here should be able to guide. is a thread not already made on this ? i drive an old school NA td42. so not had to play with these 'turbo' thingys..... :P i do fix cars for a living so i should be able to figure it out.
send me a pm if you want me to help try and organise a day.
if its worth doin its worth over doin
-
The Following 2 Users Say Thank You to garett For This Useful Post:
NissanGQ4.2 (23rd February 2016), rusty_nail (23rd February 2016)
-
23rd February 2016, 10:33 AM
#10
Patrol God
Check out Chaz Yellowfoot he's the guru on all things ZD30
http://chaz.yellowfoot.org/Manual%20...Controller.htm
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
Posting Permissions
Reply With Quote