[PERTH] Chasing extractors for a TD42 with a 2.5 inch outlet

**Ramsey** · 8th January 2016, 09:36 PM

Hey all,

Chasing extractors for a TD42 with a 2.5 inch outlet. Doesnt matter if it has surface rust, can easily be sand blasted and resprayed.

Regards,
Ramsey

**NissanPatrol.com.au** · 8th January 2016 09:36 PM

**Stropp** · 8th January 2016, 11:04 PM

You can buy new from mettams mufflers in midland ask for mark

**Ramsey** · 8th January 2016, 11:35 PM

I heard they are quite good in midland, cheers.

**Ramsey** · 9th January 2016, 12:10 PM

Just rang up Mettams and he wanted $380 for a set but I did'nt ask what brand they were.

I did find these on the net and was wondering if anyone has had experience with these Tiger extractors?

http://www.tuffcarparts.com/index.ph...roduct_id=1284

**Stropp** · 9th January 2016, 03:09 PM

Originally Posted by Ramsey

Just rang up Mettams and he wanted $380 for a set but I did'nt ask what brand they were.

I did find these on the net and was wondering if anyone has had experience with these Tiger extractors?

http://www.tuffcarparts.com/index.ph...roduct_id=1284

havent heard of them but aussie made so should be ok and 100 bucks cheaper

**Ramsey** · 9th January 2016, 04:15 PM

Seem decent enough, Tiger ones it is.

User Tag List

Thread: [PERTH] Chasing extractors for a TD42 with a 2.5 inch outlet

Thread Tools

Display

[PERTH] Chasing extractors for a TD42 with a 2.5 inch outlet

The Following User Says Thank You to Stropp For This Useful Post:

The Following User Says Thank You to Ramsey For This Useful Post:

Posting Permissions