-
2nd January 2016, 01:23 PM
#1
Advanced
Erg cross over pipe Blown and have Egr blocked . . . Can I .......
Block the Egr on the manifold side. ?? I'm stuck in the Outback WA At the moment and wanting to know so io can continue home. End of Holidays and meant to be home Sunday.
Any help ASAP would be greatly appreciated
Cheers
Arguing with a Zealot, is only slightly easier than tunnelling through a mountain with your forehead !!!
-
-
2nd January 2016 01:23 PM
# ADS
Circuit advertisement
-
2nd January 2016, 01:31 PM
#2
Patrol God
Have you blown the EGR cooler pipe????
Have you lost coolant??
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
2nd January 2016, 01:37 PM
#3
Advanced
No mate. It's the pipe going across the back of the engine block to the Egr . . . . We found we can MIG it up for now. If that fails, can I block it from the Manifold ?
Arguing with a Zealot, is only slightly easier than tunnelling through a mountain with your forehead !!!
-
The Following User Says Thank You to ImRobboToo For This Useful Post:
BigRAWesty (2nd January 2016)
-
2nd January 2016, 01:42 PM
#4
Patrol God
Originally Posted by
ImRobboToo
No mate. It's the pipe going across the back of the engine block to the Egr . . . . We found we can MIG it up for now. If that fails, can I block it from the Manifold ?
I would block it at the manifold. You'd be loosing exhaust Gass out the hole instead of going threw turbo
-
-
2nd January 2016, 01:55 PM
#5
Advanced
Ok cool. We are putting the Mig on it now and seems to be holding so hopefully we won't need to block it.
Tapping it out . . .
Arguing with a Zealot, is only slightly easier than tunnelling through a mountain with your forehead !!!
-
The Following 2 Users Say Thank You to ImRobboToo For This Useful Post:
BigRAWesty (2nd January 2016), threedogs (2nd January 2016)
-
2nd January 2016, 03:49 PM
#6
I am he, fear me
Originally Posted by
ImRobboToo
Ok cool. We are putting the Mig on it now and seems to be holding so hopefully we won't need to block it.
Tapping it out . . .
Yes you can block it at either or both ends.
Most people only put the plate at the RHS because it is easier to access
Dolphins are so smart that within a few weeks of captivity, they can train people to stand on the very edge of the pool and throw them fish.
-
The Following 2 Users Say Thank You to the evil twin For This Useful Post:
BigRAWesty (2nd January 2016), ImRobboToo (2nd January 2016)
-
2nd January 2016, 08:35 PM
#7
Advanced
Alls well that ends well. Glad the Mechanic was a boiler maker in a previous life Patched it up stronger than it was, and I'm now 6 hrs down the road. Another 8 hrs tomorrow and will be home. Thanks to all that posted so quickly. I was making a plate up as he did the welding (just in case and I could install it on the side of the road if the weld failed) Heading to the pub now as I think a well deserved drink is needed.
Cheers
Tapping it out . . .
Arguing with a Zealot, is only slightly easier than tunnelling through a mountain with your forehead !!!
-
The Following 4 Users Say Thank You to ImRobboToo For This Useful Post:
AB (2nd January 2016), BigRAWesty (2nd January 2016), growler2058 (2nd January 2016), the evil twin (2nd January 2016)
-
2nd January 2016, 08:38 PM
#8
-
The Following User Says Thank You to growler2058 For This Useful Post:
ImRobboToo (14th January 2016)
-
2nd January 2016, 08:45 PM
#9
Patrol God
-
The Following User Says Thank You to BigRAWesty For This Useful Post:
ImRobboToo (14th January 2016)
Posting Permissions
Reply With Quote