Westy's GU

[growler2058]

Wife has privacy glass on all trhe windows from the backdoors to the big door

[threedogs]

Wife has privacy glass on all the windows from the backdoors to the big door

What are we calling privacy glass LIMMO as in very very dark mine has limmo in he cargo window on the sides
the passenger and rear doors have one above darkest legal and drivers is darkest legal , great in summer
and even better up at camp. once I fit my internal window protectors it wont matter in the cargo area

[BigRAWesty]

Na just 20% black all around..
It was dusk when I took the second picture.. so it makes it look a little blacker than it is..

[Chubba]

Na just 20% black all around..
It was dusk when I took the second picture.. so it makes it look a little blacker than it is..

Looks good but....

[BigRAWesty]

So main tank breather mod done for extra capacity..

I also started the mounted air compressor in the rear 1/4..
Stainless flat using original bolt holes..
Solid as a rock in there..
Next I have to make a manifold to take the new pressure cut off, a gauge and outlet line..
It's a nice fit and heaps of room..
Might even get a small 25-30L water tank in there.

[Winnie]

It's gonna get pretty hot in there mate. Maybe a small computer fan that comes on when the compressor has power?

[growler2058]

It's gonna get pretty hot in there mate. Maybe a small computer fan that comes on when the compressor has power?

Youre a thinking mans man Poo

[threedogs]

So main tank breather mod done for extra capacity..

I also started the mounted air compressor in the rear 1/4..
Stainless flat using original bolt holes..
Solid as a rock in there..
Next I have to make a manifold to take the new pressure cut off, a gauge and outlet line..
It's a nice fit and heaps of room..
Might even get a small 25-30L water tank in there.

Put the air filter up high too maybe high up the D pillar,, looking good BTW
How hard is it to remove that inside panel??

[threedogs]

It's gonna get pretty hot in there mate. Maybe a small computer fan that comes on when the compressor has power?

Yeah agree you may need to fit a panel with vents on it to get abit of air flow going

http://www.ebay.com.au/itm/Air-Vent-...MAAMXQgyZR~uhM

EDIT would it be easier to mount it in your camper,

[BigRAWesty]

It's gonna get pretty hot in there mate. Maybe a small computer fan that comes on when the compressor has power?

Youre a thinking mans man Poo

Yep I have a 125mm 12v fan I'll put on the relay so when the compressor is running it'll be drawing in cold air..

Put the air filter up high too maybe high up the D pillar,, looking good BTW
How hard is it to remove that inside panel??

Not hard at all.. once the bloody draws were out the way (they ain't coming out unless I dismantle them!!!) just remove the few screw on things like Jesus handle, cargo clip and belt retainer.. remove the window surround and then remove the lower section..
It's majority clips..

Yeah agree you may need to fit a panel with vents on it to get abit of air flow going

http://www.ebay.com.au/itm/Air-Vent-...MAAMXQgyZR~uhM

EDIT would it be easier to mount it in your camper,

I don't think I need external air.. this cavity is huge.. and runs all up into the roof..