-
11th April 2020, 11:30 AM
#251
Smart like tractor
Originally Posted by
MudRunnerTD
Hi Mark. It actually has more to do with how the motors are wound. The Iskra is i believe a continuous wound units that is designed for a static machine operation and continuous load and when adapted onto a 12v winch it was found that they simply dont load up like a series wound motor. They take the load and keep going. Lets face it that is when things really get ugly. Loaded and lacking current and the Iskra will just keep pulling.
There is a bit of confusion there. These are likely to be a series wound motor just like every other winch motor, as cranes, hoist, winches etc are the primary use of a series wound motor. The iskra is probably a continuous duty motor? Maybe more poles for more torque?
There are basically 3 types of basic DC motor. Series wound, shunt wound and Compound wound (series and shunt)
96 GQ coil/Cab
08 G6eT
-
The Following 2 Users Say Thank You to Ben-e-boy For This Useful Post:
MudRunnerTD (11th April 2020), mudski (23rd April 2020)
-
11th April 2020 11:30 AM
# ADS
Circuit advertisement
-
11th April 2020, 06:54 PM
#252
Moderator
Originally Posted by
Ben-e-boy
There is a bit of confusion there. These are likely to be a series wound motor just like every other winch motor, as cranes, hoist, winches etc are the primary use of a series wound motor. The iskra is probably a continuous duty motor? Maybe more poles for more torque?
There are basically 3 types of basic DC motor. Series wound, shunt wound and Compound wound (series and shunt)
Thanks Bene, good to see you about mate, hope your well. How is your TD looking mate? Have you got a plan bud?
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
-
11th April 2020, 09:44 PM
#253
So I really need to get my arse into gear and get this done and fitted. I went out yesterday to get a load of firewood and wanted to winch a great bit of timber up the hill a bit. Winch was dead as a door nail. Last use was winching the lumbered massive pine at my place with Rossco. It was playing up then but won’t work now.
Sent from my iPhone using Tapatalk
-
-
12th April 2020, 09:30 PM
#254
Smart like tractor
Originally Posted by
MudRunnerTD
Thanks Bene, good to see you about mate, hope your well. How is your TD looking mate? Have you got a plan bud?
I'm getting by. I have a plan of getting a GU and put my speed parts on it and have soley a touring type setup.
I would like to do the snow trip if I find a decent rig in time. But there are so many over priced pieces of crap for sale
96 GQ coil/Cab
08 G6eT
-
The Following User Says Thank You to Ben-e-boy For This Useful Post:
MudRunnerTD (13th April 2020)
-
12th April 2020, 09:37 PM
#255
Righto. Oil time. Been reading over the webs and seeing different answers. 30w oil is recommended. Which I assume is engine oul. Can’t say I’ve seen a straight 30 gear oil. But I’ve read others just using your regular 80/90gear oil and similar types. 6 Fluid ounces is Warns recommendation. Stick with this?
Sent from my iPhone using Tapatalk
-
-
12th April 2020, 09:40 PM
#256
The 747
Originally Posted by
mudski
Righto. Oil time. Been reading over the webs and seeing different answers. 30w oil is recommended. Which I assume is engine oul. Can’t say I’ve seen a straight 30 gear oil. But I’ve read others just using your regular 80/90gear oil and similar types. 6 Fluid ounces is Warns recommendation. Stick with this?
Sent from my iPhone using Tapatalk
Lawnmower engine oil.
Sent from my SM-G960F using Tapatalk
-
The Following User Says Thank You to Winnie For This Useful Post:
-
12th April 2020, 09:43 PM
#257
Legendary
Originally found some outboard gear oil close to what's recommended but since have just used normal gear oil which sure will be fine. Bout 180-200ml should do. .
Sent from my SM-G930F using Tapatalk
-
The Following User Says Thank You to Rossco For This Useful Post:
-
13th April 2020, 12:30 AM
#258
Originally Posted by
Winnie
Lawnmower engine oil.
Sent from my SM-G960F using Tapatalk
Righto. Which is the 30w engine oil I have. Cheers.
Sent from my iPhone using Tapatalk
-
-
20th April 2020, 09:20 PM
#259
Mudski's High Warn High Mount Rebuild into an ARB GU Bar
She’s nearly finished!
IMG_2825.jpg
IMG_2826.jpg
I have the Iskra Mahle motor mounted on shortened Gigglepin motor mounting bolts.
I then made up my own mounting bracket for the solenoid.
My last issue. I seem to have misplaced the bolts for the freespool delete thingo...
IMG_2828.jpg
Other than that, and wiring the solenoid to the motor. It’s ready. Yeah baby!
Sent from my iPhone using Tapatalk
Last edited by mudski; 20th April 2020 at 09:29 PM.
-
The Following 7 Users Say Thank You to mudski For This Useful Post:
0-TJ-0 (21st April 2020), Cuppa (21st April 2020), MB (20th April 2020), mudnut (20th April 2020), PeeBee (20th April 2020), Rossco (21st April 2020), Winnie (20th April 2020)
-
21st April 2020, 06:55 PM
#260
Legendary
Holy moly Markie looks smick as too good to use lol . Sticker on top is upside down but. .
Sent from my SM-G930F using Tapatalk
-
The Following 2 Users Say Thank You to Rossco For This Useful Post:
MB (21st April 2020), mudski (21st April 2020)