-
3rd September 2015, 10:46 PM
#1
Beginner
The Moments Before It All Went Wrong :P
From awhile ago now but here is a picture and a video
Had To Replace Clutch, All Oils (Gearbox, Transfer, Front Diff & Back Diff) & Stater Motor. Carpets had to be dried out etc.. haha Bit of fun
-
-
3rd September 2015 10:46 PM
# ADS
Circuit advertisement
-
4th September 2015, 07:39 AM
#2
Patrol Guru
at least you had some fun though
-
-
4th September 2015, 07:50 AM
#3
Patrol God
Your breathers for front diff, gearbox and transfer case shouldn't have got any water in them if they were still the factory setup (up into the passenger side front guard) unless the water got in some other way?
tappa lives!
Hello from Under Down Under!
-
-
4th September 2015, 08:24 AM
#4
Patrol God
Originally Posted by
taslucas
Your breathers for front diff, gearbox and transfer case shouldn't have got any water in them if they were still the factory setup (up into the passenger side front guard) unless the water got in some other way?
tappa lives!
Hot diffs cold water,,,,,maybe
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
4th September 2015, 10:16 AM
#5
Beginner
filled with water lol had water inside the car so high i couldn't see that pedals hahah all because a friend said "bet you can't get through that" hahha i got through the second time was on the return she let go haha
-
-
4th September 2015, 10:28 AM
#6
Patrol God
Did water come out when you drained the front diff and gearbox?
I've had water over the bonnet a lot of times and haven't had any get into the front diff or gearbox. The breathers are fairly high up from factory. Are yours connected properly?
tappa lives!
Hello from Under Down Under!
-
-
4th September 2015, 10:35 AM
#7
Beginner
na breathers weren't screwed in properly and they leaked. Now i have diff breathers up inside the bonnet at the top of the firewall
-
-
4th September 2015, 11:05 AM
#8
Patrol God
Aha! Well that's a bugger. A lesson there I guess.
tappa lives!
Hello from Under Down Under!
-
-
4th September 2015, 11:10 AM
#9
Beginner
yer done all the repairs myself so was good to learn anyway
-
-
4th September 2015, 01:44 PM
#10
Yeah been there and done that.... Lol Last time I did that it cost me around 2.5k on repairs and replacement parts.
-