-
30th August 2015, 11:49 PM
#1
Expert
Anyone rebuilt their front calipers?
I was told by my mechanic that I need a front caliper rebuild (both sides) on my 99 GU and figured I'd save some coin and do it myself as I've done brake jobs many times before. I ordered a good aftermarket lot (Seiken) and it all seems pretty straightforward.
Kit has 4 piston seals, 4 boots, 4 pin boots, 2 bushings, 2 bleeder caps and 2 kinds of grease - red and orange.
The thing that is throwing me is the 2 different kinds of grease. They are different consistencies but nothing is stated in the instructions other than to "apply special grease to the entire surface of the piston seal prior to assembly".
Does this mean both kinds of grease for both pistons on each caliper or what? Also any other tips on rebuilding the calipers would be appreciated.
1999 GU RD28Ti turbo diesel; manual transmission; 33" Khumo mudders; ... more mods on the way
Last edited by SiberianPatrol; 31st August 2015 at 01:28 AM.
-
-
30th August 2015 11:49 PM
# ADS
Circuit advertisement
-
30th August 2015, 11:53 PM
#2
Patrol Freak
I would hazard to guess, that one is for the seals on the piston, and the other is for the bushes.........
unless one is for one side, and the other is for the other
damn, I am googling it now
I want to know
Tidy Whitey - 99 GU TD42Ti - Diesel Gas, (GUIV Turbo & Intercooler 8Lb boost), 33" Micky T's Baja MTZ's, Dual Batt's, Cargo Barrier, rear draws, HID Super Oscars, winch, Grinch & witch attached and more goodies to come
-
-
30th August 2015, 11:54 PM
#3
Expert
Well between the 2 of us maybe we can find the answer
1999 GU RD28Ti turbo diesel; manual transmission; 33" Khumo mudders; ... more mods on the way
-
-
30th August 2015, 11:55 PM
#4
Patrol Freak
Tidy Whitey - 99 GU TD42Ti - Diesel Gas, (GUIV Turbo & Intercooler 8Lb boost), 33" Micky T's Baja MTZ's, Dual Batt's, Cargo Barrier, rear draws, HID Super Oscars, winch, Grinch & witch attached and more goodies to come
-
-
30th August 2015, 11:55 PM
#5
Expert
Pretty good. I live in Russia . Siberia to be exact.
1999 GU RD28Ti turbo diesel; manual transmission; 33" Khumo mudders; ... more mods on the way
-
-
30th August 2015, 11:57 PM
#6
Patrol Freak
yeah, I have a mate who can speak it and understand it - but cannot read it.................
Tidy Whitey - 99 GU TD42Ti - Diesel Gas, (GUIV Turbo & Intercooler 8Lb boost), 33" Micky T's Baja MTZ's, Dual Batt's, Cargo Barrier, rear draws, HID Super Oscars, winch, Grinch & witch attached and more goodies to come
-
-
30th August 2015, 11:57 PM
#7
Expert
Anyone rebuilt their front calipers?
Nothing on that page - it's just an advert for the kit. No instructions. But that's basically the exact kit I have
1999 GU RD28Ti turbo diesel; manual transmission; 33" Khumo mudders; ... more mods on the way
-
-
31st August 2015, 07:30 AM
#8
Patrol Freak
Tidy Whitey - 99 GU TD42Ti - Diesel Gas, (GUIV Turbo & Intercooler 8Lb boost), 33" Micky T's Baja MTZ's, Dual Batt's, Cargo Barrier, rear draws, HID Super Oscars, winch, Grinch & witch attached and more goodies to come
-
-
31st August 2015, 12:37 PM
#9
Expert
Originally Posted by
Bigcol
sorry mate
Appreciate the effort, mate. I'm thinking the thicker grease must be for the seals and the thinner for the slider pins. Going to try to do a little more research today and see if I can find out for sure.
-
-
31st August 2015, 08:18 PM
#10
Patrol Freak
that sounds about right you know.............................
although, why 2 different types of grease is beyond me...........
Tidy Whitey - 99 GU TD42Ti - Diesel Gas, (GUIV Turbo & Intercooler 8Lb boost), 33" Micky T's Baja MTZ's, Dual Batt's, Cargo Barrier, rear draws, HID Super Oscars, winch, Grinch & witch attached and more goodies to come
-