So I realized I had a huge crack in my driver's side rear coil tower, a common problem it seems with GU's.
After reading quite a few threads I decided to repair then fit a pair of Boss Coil Tower Braces.
Easy job if you have access to a hoist, and certainly worthwhile as a preventative measure if you haven't already.
I went with the Boss ones as they helped pull the tower back into line to make it easy to mig up.
They are east to fit, just bolt straight in, a couple of the driver's side nuts are a bit of a pain to get on the top, had to bend up a bit of metal to hold it in place, but apart from that a piece of cake.
Also chucked in a 2" lift and set of 35's while I was at it, looks sweet now! Took her for a drive up the Grampians for the long weekend and she handled beautifully repaired tower.jpgbroken tower 2.jpgbroken coil tower.jpgboss tower brace.jpgwith lift and 35s.jpg