-
31st May 2015, 03:00 PM
#11
Administrator
Originally Posted by
Rossco
Nice job Daz its getting there, should be able to drive it soonish ?. Need to do the same to my fronts soon so i can get flaps back on and not rub. I did notice nice job on the lawn too whilst the wheels 's were off.
detective Rossco!
Nice one Dazz, I wonder if anyone's cut on the fold line by accident before
-
The Following 2 Users Say Thank You to AB For This Useful Post:
MudRunnerTD (31st May 2015), Rossco (31st May 2015)
-
31st May 2015 03:00 PM
# ADS
Circuit advertisement
-
31st May 2015, 03:10 PM
#12
Legendary
Originally Posted by
AB
detective Rossco!
Nice one Dazz, I wonder if anyone's cut on the fold line by accident before
That's something I'm likely to do i reckon. . . Nekminit - godamit!!
-
The Following User Says Thank You to Rossco For This Useful Post:
-
31st May 2015, 03:22 PM
#13
Moderator
You could weld a new tab on and I know guys that prefer that option but seems like more work to me although they get a sharp fold that way but me and welding panel steel have good and bad days.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
-
5th March 2019, 07:46 PM
#14
Moderator
@Winnie here is that thread mate.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
-
20th May 2019, 06:02 PM
#15
The 747
-
The Following 2 Users Say Thank You to Winnie For This Useful Post:
AB (20th May 2019), Rossco (20th May 2019)
-
20th May 2019, 07:40 PM
#16
Legendary
Nice one looks neat as. Are you going to trim back of gear guards or just leave it?
Sent from my SM-G930F using Tapatalk
-
-
20th May 2019, 07:44 PM
#17
The 747
Originally Posted by
Rossco
Nice one looks neat as. Are you going to trim back of gear guards or just leave it?
Sent from my SM-G930F using Tapatalk
I wasn't going to. I spoke to Darren and he said he did not need to with 35s. There's not much meat there to get more out of it. What do you reckon?
Sent from my SM-G960F using Tapatalk
-
-
20th May 2019, 08:41 PM
#18
Legendary
Probably don't need to but does make it look a bit more matched to 35s. Definatly scrubs without quarter chop. What control arms you got, if you go aftermarket can get the diff back a bit further with slightly longer ones more to the middle as lift moves it forward. .
Sent from my SM-G930F using Tapatalk
-
-
20th May 2019, 08:44 PM
#19
The 747
Originally Posted by
Rossco
Probably don't need to but does make it look a bit more matched to 35s. Definatly scrubs without quarter chop. What control arms you got, if you go aftermarket can get the diff back a bit further with slightly longer ones more to the middle as lift moves it forward. .
Sent from my SM-G930F using Tapatalk
Yeah I've got standard length arms so the diff sits a little bit further forward than standard.
Sent from my SM-G960F using Tapatalk
-
The Following User Says Thank You to Winnie For This Useful Post:
-
20th May 2019, 09:11 PM
#20
Legendary
-
The Following User Says Thank You to Rossco For This Useful Post: