-
18th May 2015, 07:16 PM
#1
how to fix gq clock
i dont know if this will help anyone but i have 2 gq patrols and both their clocks didnt work. so i removed them , just had to pull the panel out far enough to get stumpy phillips in to remove clock. the panel has 4 screws at the top vents,4 screws from the sides and 1 behind ash tray. clock has 2 screws and comes apart pretty easy. both of mine just needed one resistor re-soldered. this is shown in pics.20150518_182839.jpg20150518_182904.jpgthe solder joints looked okay but after being re-soldered., the clocks work fine.
-
The Following 5 Users Say Thank You to carsurgeons For This Useful Post:
Chimo (27th September 2015), Clunk (18th May 2015), graeme1969 (18th May 2015), mudnut (1st July 2015), NissanGQ4.2 (18th May 2015)
-
18th May 2015 07:16 PM
# ADS
Circuit advertisement
-
1st July 2015, 09:19 PM
#2
so was it a dry joint or had it damaged the pcb ?
-
-
2nd July 2015, 02:41 AM
#3
Advanced
-
-
23rd July 2015, 06:55 PM
#4
hi i say it is a bad joint due to heat. i did 2 clocks and both were fine after re-solder
-